712596
25
Zoom out
Zoom in
Previous page
1/112
Next page
25
EN
2. Initial start-up
Before initial use the following advice list must be observed:
Rinse all strainer supports with running warm water.
Plug in the connection line with mains plug (K) to the mains supply.
Remove the water reservoir (L) and rinse thoroughly with water and ll
with fresh, cold water up to the mark MAX (approx. 900 ml).
Place the water reservoir (L) straight onto its support and press it
downwards completely so that the valve in the bottom of the reservoir
is opened.
Place a cup with a minimum capacity of 150 ml onto the drainage
grille (G).
1. Open brewing unit (A). For this purpose, fully fold the bracket closure (B)
upwards.
2. Then take the strainer support for coee pads (C) and place it into the
brewing unit.
3. Then close the brewing unit (A) by rmly pressing the bracket closure (B)
downwards.
4. Now press shortly the Start/Stop button (H.3)
. The display element
(H.1) is ashing. After a short heat-up phase the cleaning process is
started and the cup is lled with water.
Important: After the display element (H.1) has extinguished and
an acoustic signal has been emitted the cup must be emptied and step 4
must be repeated. Then, the appliance is ready for operation.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4565 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4565 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info