602821
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
Before using for the rst time
Before making coffee for the rst time,
let the appliance go through two or three
ltration cycles using the indicated maximum
amount of cold water, but without using
ground coffee. This should also be done
if the appliance has not been used for an
extended period of time, and after descaling.
General information
A measuring scale on the water container
and on the glass carafe facilitates lling
the container with the correct amount
of clean water. The left scale is used for
regular-sized cups of approx.125 ml,
while the right scale is used for smaller
cups. Make sure that the indicated
maximum amount of water is not
exceeded.
If several consecutive brewing cycles
are required, switch off the coffee maker
after each cycle and let the appliance cool
down for approx. 5 minutes.
Important note: When lling the
appliance with fresh water shortly after
a brewing cycle is completed, there is
a danger of scalding from hot water or
steam escaping through the water outlet.
Making coffee
Filling with water:
Open the water container lid, ll the
container with the desired quantity of water
and replace the lid.
Inserting the paper lter:
Open the swing-out lter sideways and insert
a size-4 paper lter into the lter holder, rst
folding down the perforated sides of the lter.
Filling with ground coffee:
For each regular-sized cup (125ml), a
measure of about 6 g (= 1½ - 2 teaspoons)
of medium or nely ground coffee will
be required. Close the swing-out lter
afterwards.
Preparing the glass carafe:
Fit the aroma protection lid onto the carafe,
and then place the carafe into the appliance.
If correctly inserted, the lid will disable the
drip-stop mechanism in the lter holder
during the brewing cycle.
Starting the brewing cycle:
Insert the plug into a suitable wall socket
and use the On/Off switch to turn the coffee
maker on. The ltration cycle starts and the
water passes through the lter.
Removing the glass carafe:
Wait until all the water has passed through
the lter before the carafe is removed from
the appliance.
Switching off the coffee maker:
The coffee may be kept warm inside the
carafe by leaving it standing on the hot-plate.
Switch the coffee maker off once the last cup
has been poured.
The hot-plate remains hot for around 35
minutes once the brewing cycle is complete,
after which the appliance will switch itself
off automatically. Always switch off the
appliance after use and remove the plug
from the wall socket.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock do not
immerse the coffee maker in water. The
appliance may be cleaned with a slightly
damp cloth, using a mild detergent. Wipe
dry afterwards.
Do not use abrasives or harsh cleaning
solutions.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin ka 4489 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin ka 4489 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info