602809
11
Zoom out
Zoom in
Previous page
1/64
Next page
11
ltration cycles using the indicated maximum
amount of cold water, but without using
ground coffee. This should also be done
if the appliance has not been used for an
extended period of time, and after descaling.
General information
A measuring scale on the water container
and on the glass jug facilitates lling
the container with the correct amount of
clean water. With a dual-scale, the left
scale is used for regular-sized cups of
approx.125 ml, while the right scale is
used for smaller cups. Make sure that the
indicated maximum amount of water is
not exceeded.
If several consecutive brewing cycles
are required, switch off the coffee maker
after each cycle and let the appliance cool
down for approx. 5 minutes.
Important note: When lling the
appliance with fresh water shortly after
a brewing cycle is completed, there is a
danger of scalding from hot water or steam
escaping through the water outlet.
Making coffee
Filling with water:
Open the water container lid, ll the
container with the desired quantity of water
and replace the lid.
Inserting the paper lter:
Open the swing-out lter sideways and insert
a size-4 paper lter into the lter holder, rst
folding down the perforated sides of the lter.
Filling with ground coffee:
For each regular-sized cup (125 ml), a
measure of about 6 g (= 1½ - 2 tea-spoons)
of medium or nely ground coffee will
be required. Close the swing-out lter
afterwards.
Preparing the glass jug:
Fit the lid onto the jug, and then place the jug
into the appliance. If correctly inserted, the
lid will disable the drip-stop mechanism in
the lter holder during the brewing cycle.
Starting the brewing cycle:
Insert the plug into a suitable wall outlet and
use the On/Off button to switch the coffee
maker on. The ltration cycle starts and the
water passes through the lter.
Removing the glass jug:
Wait until all the water has passed through
the lter before the carafe is removed from
the appliance.
Switching off the coffee maker:
Wait until all the water has passed through
the lter before the jug is removed from the
appliance.
Keeping the coffee warm:
The coffee may be kept warm inside the jug
by leaving it standing on the hot-plate. The
plate is kept hot for around 35 minutes after
brewing is complete.
Interrupting the brewing/keeping-warm
cycle:
To interrupt the brewing cycle, or if the
keeping-warm function is not needed, press
the On/Off button again to turn the appliance
off.
Switching off the coffee maker:
Remove the plug from the wall socket once
brewing/keeping-warm is complete.
Descaling
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4478 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4478 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info