647731
12
Zoom out
Zoom in
Previous page
1/72
Next page
12
exceeded.
If several consecutive brewing cycles
are required, switch off the coffee maker
after each cycle and let the appliance cool
down for approx. 5 minutes.
Important note: When lling the
appliance with fresh water shortly after
a brewing cycle is completed, there is
a danger of scalding from hot water or
steam escaping through the water outlet.
Making coffee
Filling with water:
Open the water container lid, ll the
container with the desired quantity of water
and replace the lid.
Inserting the paper lter:
Open the swing-out lter sideways and insert
a size-4 paper lter into the lter holder, rst
folding down the perforated sides of the lter.
Filling with ground coffee:
For each regular-sized cup (125ml), a
measure of about 6 g (= 1½ - 2 teaspoons)
of medium or nely ground coffee will
be required. Close the swing-out lter
afterwards.
Preparing the glass carafe:
Fit the aroma protection lid onto the carafe,
and then place the carafe into the appliance.
If correctly inserted, the lid will disable the
drip-stop mechanism in the lter holder
during the brewing cycle.
Starting the brewing cycle:
Press the On/Off button once to turn on
the coffee maker. The red indicator light
comes on.
If the brewing cycle is to be started with
a delayed timer setting, press the PROG
button twice to verify that the timer has been
set to the desired time. Now press the On/Off
button twice. The blue indicator light AUTO
comes on. The coffee maker automatically
switches on at the pre-programmed time.
Removing the glass carafe:
Wait until all the water has passed through
the lter before the carafe is removed from
the appliance.
Switching off the coffee maker:
The coffee may be kept warm inside the
carafe by leaving it standing on the hot-plate.
The plate stays warm for about 40 minutes,
but can also be switched off earlier by
pressing the On/Off button twice. The red
indicator lamp then goes out.
Descaling
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
Any warranty claim will be null and
void if the appliance malfunctions
because of insuf cient descaling.
A lengthening of the brewing time and
increased noise during brewing indicate
that descaling of the coffee maker has
become necessary.
An excessive build-up of lime deposits is
very dif cult to remove, even when strong
descaling agents are used. It may also
cause the brewing system to leak. We
therefore strongly recommend descaling
the appliance after each thirty to forty
brewing cycles. For descaling, a vinegar
solution may be used as follows:
Mix 80 ml of vinegar essence with the
indicated maximum amount of cold water.
Pour the descaling solution into the water
container, insert a paper lter into the
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4192 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4192 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info