602863
13
Zoom out
Zoom in
Previous page
1/76
Next page
13
Heat-retaining carafe
For technical reasons the screw-in lid
does not close hermetically. Therefore
always hold the carafe in an upright
position when lled with coffee.
Keeping the coffee hot: A heat-
conserving carafe accumulates heat
energy. Therefore the carafe should
preferably be lled to its maximum
capacity. If it is only partly lled,
the temperature will not be held as
ef ciently. If you rinse out the carafe with
hot water before use, the coffee will be
kept warm for a longer time.
The interior of the heat-retaining carafe
insert consists of high quality double-walled
glass with a vacuum in-between for better
insulation. Any streaks or bubble marks
inside the carafe looking like bubbles or
scratches do not affect its functional use nor
its heat-retaining ability.
In case the glass is damaged for one or
the other reason as mentioned below,
there is a risk that the glass carafe
implodes. This might happen quite some
time after the glass carafe has actually been
damaged.
Therefore do not drink out of the carafe
and do not put your hand into it. Always
close the carafe with its screw cap. The
coffee can be poured out easily by half
a turn of the cap, without removing the
cap. Do not leave the vacuum carafe
unattended near where children may
reach it.
To prevent damage to the glass carafe:
Avoid shocks and great differences in
temperature.
Do not stir in the carafe, for example with
a metal spoon.
Do not use hard brushes or abrasive
cleaning agents.
Do not wipe the inside with a cloth. Dust
particles may cut the glass (similar to a
glass-cutter).
Do not wash in a dishwasher.
Do not use in a microwave oven.
Descaling
Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
Any warranty claim will be null and
void if the appliance malfunctions
because of insuf cient descaling.
A lengthening of the brewing time and
increased noise during brewing indicate
that descaling of the coffee maker has
become necessary.
An excessive build-up of lime deposits is
very dif cult to remove, even when strong
descaling agents are used. It may also
cause the brewing system to leak. We
therefore strongly recommend descaling
the appliance after each thirty to forty
brewing cycles. For descaling, a vinegar
solution may be used as follows:
Mix 80 ml of vinegar essence with the
indicated maximum amount of cold water.
Pour the descaling solution into the water
container, insert a paper lter into the
lter holder without adding any ground
coffee as described in section Making
coffee, and let the appliance run through
one
ltration cycle. Repeat the procedure
if necessary. During descaling, ensure
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin KA 4115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin KA 4115 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info