602866
10
Zoom out
Zoom in
Previous page
1/60
Next page
10
Preparing the glass jars
Ensure the glass jars are clean and dry.
Add 1 to 2 teaspoonful of natural yoghurt
(without sugar or fruit juice) into the glass
jars.
Dry culture can be used instead of natural
yoghurt.
Divide the yoghurt powder into the jars,
following the manufacturer’s instructions.
The maximum amount per jar is about
160 ml.
Brie y heat up the milk to 90 °C and then
allow it to cool to approx. 40 °C.
U. H. T. milk does not need to be heated
to a high temperature.
Divide the milk equally into the glass
jars and mix the contents gently but
thoroughly.
With warm milk, it will take 5 to 6 hours to
make yoghurt.
If cold milk is used, it will take 9 to 10 hours
to make yoghurt.
Operation
Set up the yoghurt maker in a room at
normal room temperature.
Now place the lids on the jars and
arrange the jars in the yoghurt maker.
Cover the yoghurt maker with the top lid.
Connect the appliance to the mains.
A beep signal is heard. The display brie y
lights up blue, showing ‘
---’.
Now press the timer button. The
display brie y lights up blue and the
hour indicator starts ashing. Use the
+/- buttons to set the number of hours
required.
Press the timer button again. Use the +/-
buttons to set the minutes (if necessary).
Press the Start/Stop button. The
appliance switches on and the remaining
running time is shown in the display.
The yoghurt maker should now be left
undisturbed until the yoghurt has set.
Avoid draught and shocks.
Once the pre-set processing time has
elapsed, ve beep signals are heard and
the display shows ‘
---’.
Remove the plug from the wall socket,
transfer the warm jars to the refrigerator
and allow the yoghurt to develop further
for a few hours.
If you wish to make fruit yoghurt, add
the fruit to the warm yoghurt before you
transfer the jars to the refrigerator to cool.
Once you have made your rst batch of
yoghurt, reserve the required amount of
the yoghurt for your next batch.
Remark: After several cycles the yoghurt
may become watery, and it is then time
to restart the process with fresh natural
yoghurt or fresh yoghurt powder.
To interrupt the process before the pre-set
time has expired, use the
+/- buttons to
set the timer back to ‘0’ and then remove
the plug from the wall socket.
Interruption to the power supply
If the power supply is interrupted for any
reason, the pre-set processing time will
remain in store for 10 minutes.
Should the power cut last longer than hat,
the appliance will need to be re-started.
Cleaning and care
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock, do
not clean the appliance with liquids or
immerse it.
Use only a clean, dry or slightly damp
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin JG 3523 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin JG 3523 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info