794445
15
Zoom out
Zoom in
Previous page
1/104
Next page
15
142 x 208 mm
Installing the wall mount
1. Hold the wall mount to the wall, aligned in a vertical position.
2. Use a pencil to mark the holes.
3. Drill the holes (approx. 6 mm Ø).
4. Insert the dowels (included) into the holes.
5. Fasten the wall mount using the screws (included) and check that it is secure.
6. Attach the tools to the wall mount as shown in Fig. I (foldable furniture tool with item no. 7186 & 7187 only).
Charge battery
Information on battery charging can be found in the enclosed -original instructions for use.
Information on ordering spare batteries can be found in the “Spare parts and accessories” section of these instructions for
use.
Assembling the appliance
Remove any remaining packaging from the appliance and assemble the component parts:
1. push the dust container into the appliance until you hear it click into place.
2. Push the suction tube onto the appliance.
3. Attach the desired tool to the suction tube (see “Operating the appliance”).
Operating the appliance
Selecting tools
Select the tools for the surface to be vacuumed:
Floor tool
With rotating brush roller. For vacuuming carpets, low pile carpets without loose threads and hard oors.
Upholstery tool
With rotating brush roller. For vacuuming upholstery, mattresses, car seats.
Small furniture tool
For vacuuming furniture and sensitive or hard-to-reach areas, such as cleaning space between keyboard keys.
Flexible furniture tool
Foldable. For vacuuming high cabinets, door frames and the like.
Crevice tool
For vacuuming spaces in the sofa and other hard-to-reach areas.
The tools can be used with and without the suction tube.
Always ensure that the surface to be cleaned can withstand the stress of the oor tool or upholstery tool with a powered
brush roller without damage.
Vacuuming
1. Attach the desired tool to the appliance or to the suction tube.
2. Switch on the appliance with the button. The appliance operates in ECO mode.
3. Each time you press the button the suction mode is changed as follows: ECO→MIDDLE→POWER→ECO.
Press and hold down the button for 3 seconds to set the TURBO mode. The appliance will switch to POWER mode
in two minutes.
4. Vacuum the oor.
5. Switch off the appliance with the button.
6. Empty and clean the dust container (see chapter “Maintaining the appliance”).
7. Place the appliance on the wall mount after use.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HV 7186 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HV 7186 in the language / languages: All languages as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info