111935

Severin HT9600 Manual

5
Zoom out
Zoom in
Previous page
1/32
Next page
Hair dryer
Dear Customer
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
e hair dryer should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage corresponds
with the voltage marked on the rating label of
the hair dryer.
Models with dual-voltage selector:
Models equipped with a dual voltage switch
can be set to di erent supply voltages by
using a coin or a similar object. Make sure
that the set voltage corresponds with the
supply voltage.
is product complies with all binding CE
labelling directives.
Important safety instructions
Caution: z do not use the
appliance near bath tubs,
washbasins or any other
receptacle containing water.
Protect the appliance from moisture and
splashing water and do not operate it with
wet hands.
In the vicinity of any water source, there z
is a risk even when the appliance is
switched o .  erefore, always remove
the plug from the wall socket a er use,
especially if the appliance is being used in
a bathroom.
Additional protection is available by tting
an earth-leakage circuit-breaker with
a rated tripping current not exceeding
30mA into your bathroom installation.
Please consult a quali ed electrician.
Electric heating appliances operate at very z
high temperatures. Do not touch any part
of the appliance except the grip. Otherwise
there is a real risk of burning.
Do not use the appliance on synthetic hair- z
pieces or wigs, as the heat emitted might
cause damage to the synthetic  bres.
Make sure the air intake and outlet z
openings are not blocked (e.g. by  ngers or
hair), and that no  u or  bre particles are
allowed to accumulate in the air intake.
A blockage in the air- ow system may
cause the integral thermal safety cut-
out to switch o the appliance. Should
this occur, immediately disconnect the
appliance from the mains power and allow
su cient time for it to cool down before
the blockage is removed and the appliance
is switched on again.
Every time the appliance is used, the main z
body including the power cord as well as
any attachment tted should be checked
thoroughly for any defects. Should the
appliance, for instance, have been dropped
onto a hard surface, it must no longer be
used: even invisible damage may have
adverse e ects on the operational safety of
the appliance.
To prevent damage to the power cord, z
do not bend or kink the cable, especially -
where it leaves the housing,
do not pull on the cord, -
do not coil the power cord around the -
appliance.
Do not leave the appliance unattended z
while in use.
Always switch o and remove the plug z
from the wall socket a er use, as well as
in cases of malfunction, and -
during cleaning. -
When removing the plug from the wall z
socket, never pull on the power cord;
always grip the plug itself.
Do not place the appliance on any surfaces z
sensitive to heat during or immediately
a er use.
is appliance is not intended for use z
by any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning
the use of the appliance by a person
5
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HT9600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HT9600 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Severin HT9600

Severin HT9600 User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info