Manual Severin ht 0150 (page 9 of 42) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

399097

Zoom out

Zoom in

1/42

Hair dryer

Dear Customer

Before using the appliance, the user should

read the following instructions carefully.

Connection to the mains supply

The hair dryer should only be connected to a

socket installed in accordance with the

regulations.

Make sure that the supply voltage corresponds

with the voltage marked on the rating label of

the hair dryer.

This product complies with all binding CE

labelling directives.

Familiarisation

1. Air intake openings

2. Cool function

3. Air temperature control

4. Air flow control

5. Hanging loop

6. Power cord with plug

7. Professional styling nozzle

8. Air outlet openings

Important safety instructions

■ Caution: do not use the

appliance in the vicinity of a

bath, shower or swimming-

pool, over a washbasin filled

with water or near any other receptacle

containing water.

Protect the appliance from moisture and

splashing water and do not operate it with

wet hands.

■ In the vicinity of any water source, there is

a risk even when the appliance is switched

off. Therefore, always remove the plug from

the wall socket after use, especially if the

appliance is being used in a bathroom.

For additional protection, the installation of

a residual current device (RCD) having a

rated residual operating current not

exceeding 30 mA is advisable in the

electrical circuit supplying the bathroom.

Ask your installer for advice.

■ Electric heating appliances operate at very

high temperatures. Do not touch any part of

the appliance except the grip. Otherwise

there is a real risk of burning.

■ Do not use the appliance on synthetic hair-

pieces or wigs, as the heat emitted might

cause damage to the synthetic fibres.

■ Make sure the air intake and outlet

openings are not blocked (e.g. by fingers or

hair), and that no fluff or fibre particles are

allowed to accumulate in the air intake.

A blockage in the air-flow system may

cause the integral thermal safety cut-out to

switch off the appliance. Should this occur,

immediately disconnect the appliance from

the mains power and allow sufficient time

for it to cool down before the blockage is

removed and the appliance is switched on

again.

■ Every time the appliance is used, the main

body including the power cord as well as

any attachment fitted should be checked

thoroughly for any defects. Should the

appliance, for instance, have been dropped

onto a hard surface, it must no longer be

used: even invisible damage may have

adverse effects on the operational safety of

the appliance.

■ To prevent damage to the power cord,

- do not bend or kink the cable, especially

where it leaves the housing,

- do not pull on the cord,

- do not coil the power cord around the

appliance.

■ Do not leave the appliance unattended

while in use.

■ Always switch off and remove the

plug from the wall socket after use,

as well as

- in cases of malfunction, and

- during cleaning.

■ Do not operate the appliance when it is

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin ht 0150 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin ht 0150 Manual

Product: