712561

Severin HT 0136 Manual

10
Zoom out
Zoom in
Previous page
1/46
Next page
checked thoroughly for any defects. If the
appliance, for instance, has been dropped
onto a hard surface, it must no longer be
used: even invisible damage may have
adverse effects on its operational safety.
The power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
force has been used to pull the power cord.
Damage cannot always be detected from
the outside; the entire unit should therefore
be checked by a qualifi ed technician before
it is used again.
To prevent damage to the power cord,
- do not bend or kink the cable, especially
where it leaves the housing,
- do not pull on the cord,
- do not coil the power cord around the
appliance.
Do not leave the appliance unattended
while in use.
Always remove the plug from the wall
socket
- after use,
- in case of any malfunction,
- before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not place the appliance on any surfaces
sensitive to heat during or immediately after
use.
No responsibility will be accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as in
- shops, offi ces and other similar working
environments,
- agricultural areas,
- hotels, motels etc. and similar
establishments,
- bed-and breakfast type environments.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement of the
power cord. If repairs are needed, please
send the appliance to one of our customer
service departments. The addresses can be
found in the appendix to this manual.
Dryer models with IONIC function
When brushing hair, the friction may create
a static charge, causing the hair to ‘fl y’. By
generating negative ions, the IONIC function
largely neutralises this static charge and makes
it easier to treat the hair.
The IONIC function is automatically enabled
during use, irrespective of the switch settings; it
is indicated by the indicator light.
Styling nozzle
The styling nozzle can be fi tted to the air outlet
to facilitate shaping the hair during blow drying.
Volume diffusor
The volume diffusor is also fi tted to the air
outlet.
The diffusor is used to create or maintain the
volume and natural look of curly or wavy hair.
Always start at the ends of the hair, working
your way towards the roots. Move the diffusor
with a gentle circular motion over the head.
For increased volume, the hair should be
gently blow-dried from above, i.e. with the head
forward and hair hanging down.
Air-fl ow and temperature controls
By using different combinations of the air-fl ow
and temperature controls, various settings are
possible when drying the hair.
The air-fl ow control regulates the air-fl ow
intensity, while the temperature control
regulates the heat of the air-fl ow.
With the air-fl ow control set to the ‘O’-position,
the hair-dryer is switched off.
Cool function
After using the heat setting, the cool function
can be employed. This supplies cooler air
to help fi rm the hair and give it an attractive
10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HT 0136 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HT 0136 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info