712559
10
Zoom out
Zoom in
Previous page
1/46
Next page
To prevent damage to the power cord,
- do not bend or kink the cable, especially
where it leaves the housing,
- do not pull on the cord,
- do not coil the power cord around the
appliance.
Do not leave the appliance unattended
while in use.
Always switch off and remove the
plug from the wall socket after use,
as well as
- in cases of malfunction, and
- during cleaning.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not place the appliance on any surfaces
sensitive to heat during or immediately after
use.
No responsibility will be accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as in
- shops, offi ces and other similar working
environments,
- agricultural areas,
- hotels, motels etc. and similar
establishments,
- bed-and breakfast type environments.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement of the
power cord. If repairs are needed, please
send the appliance to one of our customer
service departments. The addresses can be
found in the appendix to this manual.
The IONIC function
The IONIC function facilitates gentle, easy hair
styling by preventing a static charge in the hair.
It uses the build-up of a negative 'ion-cloud'
to prevent 'fl yaway' hair caused by a positive
charge.
The IONIC function is automatically enabled
during use, irrespective of the switch settings.
Styling nozzle
The styling nozzle can be fi tted to the air outlet
to facilitate shaping the hair during blow drying.
Air-fl ow and temperature controls
By using different combinations of the air-fl ow
and temperature controls, various settings are
possible when drying the hair.
The air-fl ow control regulates the air-fl ow
intensity, while the temperature control
regulates the heat of the air-fl ow.
With the air-fl ow control set to the '0'-position,
the hair-dryer is switched off.
Cool function
With the air temperature control at position
2 or 3, the cool function can be used. It will
supply cooler air, which helps fi rming and
shaping the hair.
Operation
Connect the hair dryer to a suitable wall socket
and select the desired power setting with the
switches integrated in the handle.
Cleaning and care
Before cleaning the hair dryer, remove
the plug from the wall socket and let the
appliance cool down completely.
To avoid the risk of electric shock, do not
clean the hair dryer with water nor immerse
it in water.
If necessary, the housing of the hair dryer
may be wiped with a dry lint-free cloth.
The air intake grill can be removed for
easy cleaning. Remove any accumulated
lint particles or hair; replace the grill after
cleaning.
Disposal
Do not dispose of old or defective
appliances in domestic garbage;
this should only be done through
public collection points.
Guarantee
This product is guaranteed against defects in
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HT 0134 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HT 0134 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info