712549
11
Zoom out
Zoom in
Previous page
1/58
Next page
suffocation.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as in
- shops, offi ces and other similar working
environments,
- agricultural areas,
- hotels, motels etc. and similar
establishments,
- bed and breakfast type environments.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement of the
power cord. If repairs are needed, please
send the appliance to one of our customer
service departments. The address can be
found in the appendix to this manual.
Charging process
Before using the appliance for the fi rst time the
battery must be fully charged, which will take
about 12 hours. The appliance can remain on
charge for a longer period without damage or
danger, but this should generally be avoided.
With a fully charged battery, the appliance can be
operated for around 30 minutes.
If you experience a considerable decrease in
trimming performance, switch off the appliance
and recharge the battery. The appliance may
also be used with the adaptor connected
directly. In this case, however, the battery
must be briefl y charged for approximately 10
minutes. The charging process
starts only once
the unit is switched off.
Insert the connecting plug of the adaptor
into the corresponding jack on the charging
base.
Ensure that the unit is switched off and
place it in the charging base.
Insert the adaptor into a suitable wall
socket. The charging process begins
automatically. The red mains indicator
remains lit as long as the adaptor is
connected to the mains.
Once the charging process is complete,
always remove the adaptor from the wall
socket fi rst before disconnecting the jack
from the charging base.
The battery can also be recharged by
inserting the connecting plug of the adaptor
directly into the corresponding jack on the
underside of the trimmer.
While charging, the transformer within the
adaptor will become warm. This is perfectly
normal and safe and does not indicate a
malfunction of any kind.
If the appliance has not been used for a
long period, the capacity of the battery may
decrease by a certain amount. However,
full capacity will be restored after several
charge/discharge cycles.
Use
Changing the trimming-heads
To remove a trimming-head, fi rst turn it
anti-clockwise until the ‘open-lock’ symbol
on the head and the mark on the housing
are aligned; then pull the head off.
To fi t the trimming-head, place it on the
appliance in such a way that the mark
and the ‘open-lock’ symbol on the head
are aligned. Then turn the head clockwise
to lock it. The mark and the ‘closed-lock’
symbol are now aligned.
Fitting the push-on combs
The push-on comb attachments allow for
cutting length adjustment from 3 to 12 mm.
The medium-size comb is suitable for cutting
lengths from 3 to 6 mm, the large-size comb
for lengths from 9 to 12 mm. These comb
attachments can only be used with the wider
hair trimming-head.
When fi tting a push-on comb, ensure that it is
safely locked by the two locking buttons on the
sides. To remove the comb, push it sideways
with the thumb.
For the narrow beard/contour trimming-head,
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin HS 0771 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin HS 0771 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info