Manual Severin Hs 0705 (page 10 of 46) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712547

Zoom out

Zoom in

1/46

and to avoid hazards, repairs of electrical

appliances must be carried out by qualiﬁ ed

personnel, including the replacement of the

power cord. If repairs are needed, please

send the appliance to one of our customer

service departments. The address can be

found in the appendix to this manual.

Short-time operation

The appliance is designed to be operated for

a short period, i.e. the hair trimmer can be

operated without interruption for a maximum

of 20 minutes. Operation can be resumed

after the appliance has cooled down for

approximately 30 minutes.

Use

Adjusting the cutting length

– The side adjusting lever allows smooth

adjustment of the cutting length from

approx. 1 to 1.6 mm, even during

operation.

– The push-on combs provided extend the

range of the cutting length and are ﬁ tted

onto the trimming comb. After use, remove

the attachment at the back and lift it off.

Operation

– Before cutting, the hair should be clean and

thoroughly combed ﬁ rst.

– When cutting longer hair, use a push-on

comb or cut hair above a normal comb.

Always start with the largest push-on comb,

as this will help you to get a feel for cutting

the hair to the desired length.

– For shorter hair-cuts, follow-up with a

smaller push-on comb or without any comb

attachment.

– Cut from bottom to top with the trimming

comb lying against the head; lead the

appliance upwards through the hair, moving

it gradually away from the head at the same

time.

– For a shaped cut, reverse the appliance and

shorten the hair from top to bottom without

a push-on comb.

Care and Cleaning

 It is essential to switch off the unit and

remove the plug from the wall socket before

cleaning and oiling.

 To avoid the risk of electric shock, the

appliance must not be immersed in liquid

or even allowed to come into contact with

liquid.

 Do not use abrasives or harsh cleaning

solutions.

– If necessary, the housing may be wiped

with a dry, lint-free cloth.

Trimming comb and trimming blade

– After each use, use the cleaning brush

to remove the hair between the trimming

comb and the trimming blade.

– The trimming comb and trimming blade

can be removed for occasional thorough

cleaning by loosening the ﬁ xing screws.

 During re-assembly, the trimming comb

must be precisely aligned with the trimming

blade. Take extreme care that the trimming

blade does not protrude over the trimming

comb. With the adjustment lever set to

its minimum cutting length, the distance

between the tips of the trimming blade and

the trimming comb should be at least 1

mm.

 After cleaning, and also after the appliance

has been used for approx. 20 minutes, put

a few drops of acid-free oil between the

trimming comb and the trimming blade

and then switch the appliance brieﬂ y on

to ensure that the oil is well and evenly

distributed. Regular oiling will guarantee

good cutting performance over a long

period and thus a long service life.

– When the appliance is not in use, put the

protective cover over the trimming comb.

Disposal

Do not dispose of old or defective

appliances in domestic garbage;

this should only be done through

public collection points.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin Hs 0705 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin Hs 0705 Manual

Product: