Manual Severin hs 0704 (page 11 of 46) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

401677

Zoom out

Zoom in

1/46

send the appliance to one of our customer

service departments. The addresses can be

found in the appendix to this manual.

Charging process

Before using the appliance for the first time the

battery must be fully charged for a period of

approximately 12 hours. However, the

appliance can remain on charge for a longer

period without damage or danger.

Should you experience a considerable

decrease in trimming performance, switch off

the appliance and recharge the battery. The

hair trimmer may also be used by means of

the adaptor. In this case, however, the battery

must be briefly charged for approximately 10

minutes. The charging process starts only once

the unit is switched off and is visible by the

charge indicator.

With the appliance switched off, insert the

connecting plug of the adaptor into the

corresponding jack on the main unit.

Insert the adaptor into a suitable wall

socket. The charging process begins

automatically and is shown by the charge

indicator on the appliance. The indicator

remains lit as long as the charging base is

connected to the mains power.

The charging process only starts if the unit

has been switched off.

Once the charging process is complete,

always remove the adaptor from the wall

socket first before disconnecting the plug

from the appliance.

Whilst charging, the transformer within the

adaptor will become warm. This is perfectly

normal and safe and does not indicate a

malfunction of any kind.

If the appliance has not been used for a

long period of time, the capacity of the

battery may decrease by a certain amount.

However, full capacity will be restored after

several charging/discharging cycles.

Operation

Adjusting the cutting length

The push-on attachment combs allow for

adjusting the cutting length and are fitted over

the trimming comb. The combs have the

following sizes: 3 mm, 6 mm, 9 mm and 12

mm. The thinning head is useful for thinning

out the hair. Unlock and remove the

attachment after use.

A few remarks on cutting hair

■ Before each use, always put a few drops of

acid-free oil between the trimming comb

and the trimming blade.

Always start with the largest push-on comb.

The hair should first be combed, and then

generally cut against its natural direction.

For longer hair-cuts use a push-on comb or

a normal comb.

Cut from bottom to top with the trimming

comb lying against the head; lead the

appliance upwards through the hair, moving

it gradually away from the head at the same

time.

For a shaped cut, reverse the appliance

and shorten the hair from top to bottom

without using the push-on comb.

The thinning head is useful for thinning out

certain parts of the hair by a third, eg for

modern, short-style hair. Cut the areas to

be thinned against the natural direction of

growth.

Cleaning and Care

General

■ It is essential to switch off the appliance

and remove the adaptor from the wall

socket before cleaning and oiling.

■ For safety reasons, the electric hair trimmer

and the adaptor must not be immersed in

liquid or even allowed to come into contact

with liquid.

If necessary, the housing may be wiped

with a smooth dry cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin hs 0704 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin hs 0704 Manual

Product: