Manual Severin HS 0701 (page 10 of 50) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712545

Zoom out

Zoom in

1/50

battery must be fully charged, which will take

about one hour. However, the appliance can

remain on charge for a longer period without

damage or danger.

If you experience a considerable decrease in

trimming performance, or if the indicator light

shows red, switch off the appliance and

recharge the battery.

Insert the connecting plug of the adapter

into the corresponding jack on the charging

base.

Ensure that the trimmer is switched off and

place it in the charging base.

Insert the adapter into a suitable wall

socket. The charging process begins

automatically and is shown by the rapid-

flashing red indicator light on the charging

base.

When the battery is fully charged, the

indicator light shows a slow-flashing green

light.

Once the charging process is complete,

always remove the adapter from the wall

socket first before disconnecting the jack

from the charging base.

While charging, the transformer within the

adapter will become warm. This is perfectly

normal and safe and does not indicate a

malfunction of any kind.

If the appliance has not been used for a

long period, the capacity of the battery may

decrease by a certain amount. However,

full capacity will be restored after several

charge/discharge cycles.

Use

Cutting length fine adjustment

The cutting length is adjustable, from 1 to 3

mm, in five steps by turning the cutting length

control back or forth, as required. With the

control turned back all the way (the flat section

is visible), the cutting length is 1mm. With it

turned forward all the way, the cutting length is

3mm.

Trimming head

When fitting a trimming head, ensure that it is

safely locked by the locking buttons on either

side. To remove a trimming head, push it away

to one side.

3/6 mm and 9/12 mm trimming heads

The trimming heads provide cutting lengths of

3, 6, 9 and 12 mm.

Set the control in such a way that the markings

on the adjustment wheel are properly aligned

with the corresponding dots on the housing.

Tapered trimming head

The tapered trimming head is designed for

cutting the hair while avoding a 'stepped'

effect.

In this way, the hair above the ears is cut

shorter, while remaining longer towards the top

of the head. For the right side of the head, the

attachment marked 'Right Taper' should be

used; for the opposite side use the one

marked 'Left Taper'. Start trimming from the

back of the head and cut the hair against its

natural direction of growth towards the

temples, before changing the attachment to

trim the opposite side.

Operation

■ Before each use, always put a few drops of

acid-free oil between the trimming comb

and the trimming blade.

Always start with the highest setting of the

push-on comb.

The hair should first be combed, and then

generally cut against its natural direction.

For longer hair-cuts use the push-on comb

or a normal comb.

Cut from bottom to top with the trimming

comb lying against the head; lead the

appliance upwards through the hair, moving

it gradually away from the head at the same

time.

For a shaped cut, reverse the appliance

and shorten the hair from top to bottom

without using the push-on comb.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin HS 0701 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin HS 0701 Manual

Product: