602879
9
Zoom out
Zoom in
Previous page
1/52
Next page
9
main body including the power cord as
well as any attachment tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull the
power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
Warning:
Do not touch the sealing wire or the
rubber pressure seal in the top cover.
There is a danger of burns.
Do not attempt to remove liquid of any
kind by means of the suction function.
Always remove the plug from the wall
socket
- in case of any malfunction,
- after use, and also
- before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Do not allow the housing or the power
cord to touch hot surfaces such as
hotplates, or come into contact with any
open heat sources.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
This appliance is intended for domestic or
similar applications, such as
- in shops, of ces and other similar
working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and
similar establishments,
- in bed-and breakfast type environments.
Intermittent operation
The appliance is designed for intermittent
operation (13/90) only; ie, it can be used
for a maximum of 13 seconds, after which it
must be allowed to cool down for around 90
seconds before being used again.
Operation
Insert the plug into a suitable wall outlet.
To prepare the bag, unroll the plastic to
the desired width (max 28.5 cm).
Close the cover.
Seal the foil by simultaneously pressing
both sides of the cover down.
The sealing process is indicated by the
green lamp. Once the lamp goes off, the
bag can be removed.
Turn the roll slightly back so that the
suction nozzle and the sealing wires are
accessible.
The bag may be lled up to ¾ of its
capacity. If any liquids are to be sealed
in, the bag should only be lled to half
capacity. Do not attempt to remove liquid
matter through the suction nozzle.
The upper edge of the bag, as well as the
areas to be sealed, should be clean and
dry.
Position the bag in the unit in such a way,
that the suction nozzle reaches well into
the bag.
Make sure that the bag is smooth and
free of any wrinkles or folds in the areas
to be sealed.
Close the cover and start the suction
process by pressing down on the left side
of the cover.
The suction process is indicated by the
red lamp.
During suction, the bag should be lifted
up and pulled slightly outwards. In this
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin FS 3604 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin FS 3604 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info