Manual Severin FR 2439 (page 12 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712492

Zoom out

Zoom in

1/78

has cooled down.

Frying container

– Inserting the frying container:

When placing the frying container into

the housing, ensure that the holding

bracket for the basket is located opposite

from the heating element assembly.

– Fill amount:

Before heating up, the oil/fat level must

be between the minimum and maximum

level marks.

 e minimum and maximum level marks

can be found on the side of the frying

container.

 e container holds a maximum of

approx. 3.7 litres of oil.

Before  lling the container with the

required quantity of oil, the frying basket

should be removed.

Note: the di erence between the

minimum and maximum marks is

approx. 700 ml.

– Types of oil/fat to be used:

Only pure vegetable oil/solidi ed fat

should be used in this deep fryer. It can be

heated up to 220° C and is neutral in taste.

Do not mix di erent kinds of oil/fat.

Oil:

We recommend the use of oil speci cally

intended for deep-frying, which may be

safely heated to high temperatures.  e

maximum safe capacity of the container

is approx. 3.7 litres. Please observe the

maximum mark.

Solidi ed fat:

Never melt solidi ed fat in an empty

fryer. However, solidi ed fat may be

added straight into the frying container,

if it already contains liquid fat up to the

minimum level mark.

When using solidi ed fat, approx. 3.5 kg is

needed.  e fat should be cut into smaller

pieces  rst and melted in a separate pot,

ensuring that it just reaches a liquid state

but is not over-heated: this is to avoid the

danger of burns when pouring the fat into

the frying container a erwards. Please

observe the maximum mark.

 e recess below the heating element acts

as a cooling area where residual particles

resulting from the frying process, as well

as other impurities, are collected.  e

circulation of the oil/fat results in a lower

temperature level around the recess area.  is

collection process extends the life-span of the

frying oil/fat.

Removable heating element

Before the appliance is connected to the

mains, the power cord must be pulled out to

its full length from the storage compartment.

Fit the heating element securely into its

mounting bracket.  is will activate an

integral safety switch.  e appliance can

be operated only if the element has been

installed correctly; otherwise, the safety

switch will not allow the unit to be operated.

Do not operate the appliance unless both

the heating element and the frying container

( lled with oil or fat) have been properly

installed.

Switching the deep fryer On/O (Timer)

 e timer serves to swit ch on the appliance.

By turning the timer clockwise, the intended

running-time of the appliance can be set. If

the timer is turned anti-clockwise to position

‘

,the appliance is permanently switched on.

Before inserting the plug into a wall socket

and using the timer to turn the appliance on,

ensure that

– the frying container and the heating

element have been  tted as instructed and

– the frying container has been  lled with

oil/fat to a safe level.

A er frying is completed, turn the

temperature control knob back to its lowest

position, set the timer to ‘z’ and remove the

plug from the wall socket.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin FR 2439 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin FR 2439 Manual

Product: