603008

Severin DK 1031 Manual

13
Zoom out
Zoom in
Previous page
1/84
Next page
13
Power
Press the operating key . The display
shows the default setting, 5 (left cooking
plate: 4). Using the + and – selection keys,
the power setting can be adjusted from 1 to
10 as required (left plate from 1-7, right plate
from 1-10).
Temperature
Press the operating key
. The display
shows the default setting, 120. Using
the + and –selection keys, the required
temperature level can be selected in steps of
20 °C within a range from 60 °C to 240 °C.
Timer
The timer function allows for setting the
intended cooking time. Once the desired
function has been selected, press the
operating key , and then use the + and
– selection keys to select the cooking time.
Every press of the + key increases the
cooking time by 5-minute intervals, while
pressing the – key reduces the cooking time
by 1 minute. The maximum timer setting is
180 minutes. Once the pre-programmed time
has elapsed, a beep signal is heard and the
appliance goes into stand-by mode.
If no timer setting is selected, cooking can
only be interrupted by pressing the On/
Stand-by switch.
Do not leave the appliance unattended while
in use.
Function indicators
The function indicator shows which of the
‘Power’, ‘Temperature’ or ‘Timer’ functions
has been selected.
Automatic recognition of suitable
cookware
The appliance detects whether any
cookware has been placed on the plate,
and whether it is suitable for this appliance.
If any function is selected with non-suitable
cookware on the plate, a number of beeps
will be heard, and the display will show the
error message ---. After four beeps, the
appliance goes into stand-by mode.
Residual heat indicator
In standby mode, any residual heat in the
plate(s) is indicated on the display. If the
temperature is below approx. 50 ° C, the
indicator L shows in the display. For a
residual heat exceeding approx. 50 ° C, the
display shows H.
Operation
∙ Connect the unit to mains power.
∙ A beep signal is heard. The appliance is
now in stand-by mode.
∙ The display shows the indicator L for low
residual heat in the plate(s).
∙ Put the food into the pot or pan and put it
on the cooking surface.
∙ Use the On/Stand-by switch to turn
the appliance on. A beep signal is heard
and the function indicators for ‘Power’ and
‘Temperature’ starts fl ashing.
∙ If no input is registered within 30 seconds
of switching on, the appliance returns into
stand-by mode.
∙ Use the or operating keys to select
the required function.
∙ The appliance starts the heating process.
∙ Use the + and – selection keys to select
the desired power setting or temperature
level.
∙ If so desired, use the timer function to
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin DK 1031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin DK 1031 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info