603008
10
Zoom out
Zoom in
Previous page
1/84
Next page
10
Electric table-top hot-plates
Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
Connection to the mains supply
The appliance should only be connected
to a socket installed in accordance with the
regulations.
To avoid a power overload, do not use
any additional electrical appliances on
the same circuit.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Familiarisation
1. Power cord with plug
2. Cooking surface
3. Control panel
4. On/Stand-by switch
5. Operating key - Timer
6. Operating key - Temperature
7. Operating key - Power
8. Selection keys (+ and -) for Power /
Temperature / Timer setting
9. Function indicators – ‘Timer’,
‘Temperature’ and ‘Power’
10. Display
Important safety instructions
In order to avoid hazards, and to
comply with safety requirements,
repairs to this electrical appliance or
its power cord must be carried out by
our customer service. If repairs are
needed, please send the appliance
to our customer service department
(see appendix).
Before cleaning the appliance,
ensure it is disconnected from the
power supply and has cooled down
completely.
To avoid the risk of electric shock, do
not clean the appliance with liquids
or immerse it.
Clean the cooking surfaces with
a damp cloth after each use. For
detailed information on cleaning the
appliance, please refer to the section
Cleaning and care.
Caution: To avoid the risk of electric
shock, the unit must be switched off
and disconnected from the mains
if the surface shows any sign of
cracking or similar damage.
The appliance is not intended to be
operated by means of an external
timer or separate remote-control
system
Do not place any metal objects (eg
knives, forks or spoons) onto the
GB
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin DK 1031 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin DK 1031 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info