673017
24
Zoom out
Zoom in
Previous page
1/56
Next page
910045 de-en-fr-nl ma 2012
24/56
2. Use the keys and to set the required combination functions. The indicator
C-1’, ‘C-2’, ‘C-3’ or ‘C-4’ starts flashing, and the corresponding symbol ( , or ,
or ) appears.
3. Press to confirm the selected combination.
4. Use the keys and to set the required cooking time.
5. Press to start the cooking process. The corresponding symbol for the selected
function flashes on the display.
Quick-programming
The most commonly used microwave time-settings can be called up simply by pressing .
With this function, the microwave power setting is always 100%. Each press on the key adds
30 seconds to the cooking time.
Note: the cooking process starts as soon as the key is pressed for the first time.
Example: to programme the microwave function for a cooking time of 2 minutes at 100%
power.
1. Press 4 times. The display shows 2:00, and the symbol starts flashing.
Defrost programme according to time or weight ( )
This defrosting programme is useful for defrosting food by either setting the weight of the
food to be defrosted, or by directly setting the defrosting time. For delicate food we
recommend defrosting on the level ‘Low’ (see table Power setting), to ensure that the food is
defrosted with an even, low temperature setting.
The indicator ‘d-1’ represents weight-based defrosting; ‘d-2’ represents time-based
defrosting.
Helpful notes:
-
The defrosting process should be interrupted at regular intervals and those food portions
already defrosted should be taken out; this is to ensure that food already defrosted will
not take away heat from food that still requires defrosting.
-
Should the food not be completely defrosted after the pre-set defrosting time has
elapsed, it is advisable to limit any further defrosting times to 1-minute periods until the
food is fully defrosted.
-
Food stored in plastic containers or wrapped in plastic should be left standing for a while
after it has been taken from the freezer. Wait until the food can be easily detached from
the plastic, before it is put into the oven inside a container suitable for use with
microwave ovens.
1. Press once or twice. The display shows ‘d-1’ or ‘d-2’ and, in addition, the symbols
and .
2. Use the keys and to set the weight of the food to be defrosted (between 100g and
2000g) or the desired defrosting time (between 00:05 and 95:00).
3. Press to start the defrosting process. An acoustic signal is heard, and the symbols
and start flashing.
Re-heating function
The re-heating function is useful for heating up ready-cooked meals. For programming, it is
sufficient to indicate the type of food and the weight.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin Combi magnetron at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin Combi magnetron in the language / languages: Dutch as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info