474933
25
Zoom out
Zoom in
Previous page
1/180
Next page
Important information
If you observe flour residue on the walls of the baking-tin, open the lid during the kneading
phase, and use a rubber scraper to move the flour back into the dough so that it can be properly
processed.
Close the lid afterwards.
When using yeast, the kneading hook may be removed after the final kneading phase.
USING THE BREAD-MAKER
Your new bread-maker allows you to:
bake breads to various recipes, some of which can be found in the appendix to this manual.
However, this bread-maker also allows you to use commercially available ready-to-bake mixtures
with up to 500g of solid ingredients (for a loaf of up to 1000g).
knead dough for bread rolls, pizza etc., and let the dough rise.
Only recipes with a flour content of 200 – 550g should be used with this bread-maker. Use 1 ½
teaspoons of yeast for wheat flour, and 2 teaspoons for rye flour.
Should the flour content fall short of this minimum, thorough kneading of the dough cannot be
ensured. Excessive flour content may result in the dough rising over the edge of the baking-tin.
BEFORE FIRST USE
Remove the baking-tin by turning it anti-clockwise.
Before the bread-maker is used for the first time, it should be thoroughly cleaned, as described in
the section Cleaning and Care.
Fit the kneading hook into its socket inside the baking-tin and fill the tin with around125ml of
water.
Replace the baking-tin in the unit and turn it clockwise to lock it. Make sure that it locks firmly
into place.
Insert the plug into a suitable wall socket.
Use the
button to select programme 12 (BAKING).
Press the
-button and let the unit heat up for approximately 10 minutes with the lid open. This
will remove the smell typically encountered when first activating the heating elements. Ensure
sufficient ventilation.
Afterwards, press and hold the
-button for approx. 3 seconds to switch the bread-maker off
(this is confirmed by an acoustic signal); now remove the plug from the wall socket and allow
the appliance to cool down.
Clean the unit again as described in the section Cleaning and Care.
OPERATION
Open the lid, turn the baking-tin anti-clockwise and remove it.
Fit the kneading hook into its socket inside the baking-tin.
For best results, always put liquids in first, followed by solid ingredients such as flour.
Finally, add the yeast. Be sure to avoid any contact between the yeast and salt or liquids when
using the timer.
Replace the baking-tin in the unit and turn it clockwise to lock it. Make sure that it locks firmly
into place. Before starting the programme, close the lid, insert the plug into a suitable wall socket
and switch the appliance on.
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BM 3990 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BM 3990 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info