712428
13
Zoom out
Zoom in
Previous page
1/80
Next page
13
typically encountered when rst switching
on.
Caution: Please ensure suf cient ventilation.
Ironing
Steam ironing requires high temperatures.
The temperature level for steam ironing
is indicated on the temperature control
knob.
After lling the reservoir with water, place
the steam iron upright on its base stand
and insert the plug into the wall socket.
As soon as the steam iron is connected to
the mains, the indicator light comes on.
Set the temperature control knob to the
required ironing temperature as indicated
by the ironing symbols.
The indicator light will go out once the
required ironing temperature is reached.
Before ironing any fabrics, the soleplate
should be cleaned by passing it over an
old, clean cotton cloth, while using the
steam jet function; this helps to ush out
any dirt residues or lint particles trapped
inside the openings in the soleplate.
The steam output can be adjusted with
the steam control button or completely
switched off for dry ironing.
For dry ironing, the water reservoir may
be empty. Should there be water left in
the reservoir, the steam jet function may
also be used when dry-ironing at higher
temperature settings.
Place the steam iron upright on its base
stand after use and remove the plug from
the wall socket.
Automatic switch-off
If the appliance is switched on but not
being used for a certain period of time, it
will automatically switch off. The automatic
switch-off is indicated by a sequence of
6 beep signals; in addition, the indicator
light is ashing. As soon as the appliance is
moved, it will switch on again.
Horizontal position:
With the iron standing on its soleplate, it
will switch off after approx. 30 seconds of
inactivity.
Vertical position:
When upright on its base stand, the iron
will switch off after approx. 8 minutes of
inactivity.
Steam jet
When the steam jet button
is
depressed, an additional hot steam jet is
emitted from the soleplate. This function
can be very useful when the regular
amount of steam emitted is not suf cient
to remove stubborn creases or when
ironing dif cult or thick fabrics.
The steam jet function may also be used
with the iron held vertically, to remove
creases or wrinkles from fabrics.
Spray Nozzle
The laundry can be dampened by pressing
the spray button . This will help to
smooth out dif cult areas. The spray nozzle
may be used at any temperature level during
dry or steam ironing.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BA-9657 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-9657 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info