Manual Severin BA 3274 (page 11 of 68) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

603049

Zoom out

Zoom in

1/68

∙ This steam iron is to a large extent

resistant to hard water (up to 15º dH).

Although normal tap water may be

used, it is advisable to use distilled,

demineralised or decalciﬁ ed water.

Should you be unsure about the hardness

of the water in your area, please enquire

of the relevant local authority department.

∙ Turn the steam control button all the way

to the left to its Off-position.

∙ Fill the empty water reservoir using

the measuring cup provided. Fill to the

indicated “Max” level only.

General information about ironing

Before ironing, always check ﬁ rst whether a

label with ironing instructions is attached to

the article to be ironed.

∙ The meaning of the ironing symbols is as

follows:

• synthetics

(low temperature)

•• silk and wool

(medium temperature)

••• cotton and linen

(high temperature)

∙ These markings can also be found on the

temperature control knob of the steam

iron in form of dot symbols.

∙ Laundry to be ironed should be

sorted according to the fabric ironing

temperature. Follow the ironing symbols

and start with the lowest temperature.

∙ When ironing highly sensitive fabrics, or

if you are not sure about the fabrics, you

may carefully test-iron at a non-visible

point, e.g. inside of seam. Start with the

lowest temperature.

∙ If the laundry is being dried in a dryer

before ironing, the temperature should be

adjusted to “iron dry”. Very dry fabrics are

difﬁ cult to iron.

Start up

Clean the steam iron before using for the

ﬁ rst time, according to the instructions

given in the paragraph Cleaning and care -

Self-cleaning system. This will result in the

removal of possible dust particles from the

soleplate and subsequently lessen the smell

typically encountered when ﬁ rst switching

on.

Please ensure sufﬁ cient ventilation.

Ironing

∙ Steam ironing requires high temperatures.

The temperature level for steam ironing

is indicated on the temperature control

knob.

∙ After ﬁ lling the reservoir with water, place

the steam iron upright on its base stand

and insert the plug into the wall socket.

∙ Set the temperature control knob to the

required ironing temperature as indicated

by the ironing symbols.

∙ During the heating-up process the

indicator lamp will be on. The lamp will go

out once the required ironing temperature

is reached.

∙ Before ironing any fabrics, the soleplate

should be cleaned by passing it over an

old, clean cotton cloth, while using the

steam jet function; this helps to ﬂ ush out

any dirt residues or lint particles trapped

inside the openings in the soleplate.

∙ The steam output can be continuously

adjusted with the steam control button or

completely switched off for dry ironing.

∙ For dry ironing, the water reservoir may

be empty. Should there be water left in

the reservoir, the steam jet function may

also be used when dry-ironing at higher

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA 3274 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin BA 3274 Manual

Product: