712417

Severin BA-3254 Manual

11
Zoom out
Zoom in
Previous page
1/66
Next page
When ironing highly sensitive fabrics, or z
if you are not sure about the fabrics, you
can carefully test-iron at a non-visible
point, e.g. the inside of a seam. Start with
the lowest temperature.
If the laundry has been being dried in a z
dryer before ironing, the temperature
should be adjusted to ‘iron dry’. Very dry
fabrics are di cult to iron.
Start up
Clean the iron before using for the  rst
time, according to the instructions given in
the paragraph ‘General Care and Cleaning
- Self-cleaning system’. is will result in
the removal of any dust particles from the
soleplate and subsequently lessen the smell
typically encountered when  rst switching
on.
Please ensure su cient ventilation.
Temperature settings
e temperature can be set to 7 di erent
levels.  ese are indicated by a display bar on
the side of the LCD display.  e temperature
settings should be used as follows:
1
st
bar velvet
2
nd
bar synthetic fabrics
3
rd
bar silk
4
th
bar woll
5
th
bar cotton
6
th
bar denim
7
th
bar linen
Ironing
Always use the iron on a heat-resistant z
surface.
Steam ironing and the steam jet function z
require high temperatures.  e steam
symbol in the LCD display shows the
correct temperature range for steam
ironing.
A er lling the reservoir with water, place –
the steam iron upright on its base stand
and insert the plug into the wall socket.
Use the temperature buttons ' – +' or '−' to
set the required temperature as indicated
by the ironing symbols.
While the iron is heating up, the –
temperature symbol in the LCD display
ashes. Once the desired temperature has
been reached, an acoustic signal is heard
and the symbol shows steady.
Before ironing any fabric, the soleplate z
should be cleaned by passing it over an
old, clean cotton cloth while using the
steam jet function; this helps to  ush out
any dirt residues or lint particles trapped
inside the openings in the soleplate.
e steam output can be adjusted with z
the steam control button, or switched o
completely for dry ironing.
For dry ironing, the water reservoir may z
be le empty. But if there is any water le
in the reservoir, the steam jet function
may also be used when dry-ironing at
higher temperature settings.
Place the steam iron upright on its base z
stand a er use and remove the plug from
the wall socket.
Automatic switch-o
If the appliance is switched on but has not
been used for a certain period of time, it
will automatically switch o .  is automatic
switch-o is indicated by a beep signal; in
addition, the Auto O symbol  ashes the
LCD display.  e automatic switch-o is
indicated by a beep signal; in addition, the
red indicator light  ashes. As soon as the iron
is moved, it will switch itself on again.
Horizontal position:
When resting on its sole plate, the iron
will switch o a er approx 30 seconds of
inactivity.
Vertical position:
When standing upright on its base, it will
switch o a er approx. 10 minutes.
Steam jet from underside and tip of
soleplate
When the steam jet button is depressed, an
additional hot steam jet is emitted from the
underside and the tip of the soleplate.  is
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BA-3254 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3254 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info