Manual Severin BA-3252 (page 12 of 66) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

712409

Zoom out

Zoom in

1/66

General care and cleaning

Before cleaning the appliance, ensure it is z

disconnected from the power supply and

has cooled down completely.

To avoid the risk of electric shock, do not z

clean the appliance with water and do not

immerse it in water.

If necessary, the unit may be wiped with a –

dry lint-free cloth.

Starch, fat and other deposits on the –

soleplate may be removed with a woollen

cloth soaked in a vinegar/water solution.

Do not use abrasives or harsh cleaning z

solutions.

Do not put vinegar or other descalers into z

the water reservoir.

Self-cleaning system

 e self-cleaning system  ushes out loose

mineral deposits and keeps the appliance

free of lime and dust particles. Self-cleaning

should be carried out if the iron has not been

used for an extended period, or otherwise

every 10-15 days. Proceed as follows:

Set the steam control to ‘dry ironing’. –

Fill the water reservoir with water up to –

the maximum level mark.

Place the iron on its base stand and put the –

plug into the wall socket.

Set the temperature control to its –

maximum.

Wait until the indicator light goes out. –

Remove the plug from the wall socket. –

Hold the iron horizontally over a sink. –

Slide the steam control to the – SELF

CLEAN mark. Hold the button in that

position while swinging the iron lightly to

and fro until no more steam or hot water

is emitted.

Pour out any remaining water from the –

reservoir.

Allow the sole plate to cool down before –

cleaning it with a damp, lint-free cloth.

Cleaning the steam valve

In addition to the self-cleaning process

above, the steam valve should be taken out

and cleaned once a month.

Remove the plug from the wall socket, –

allow the appliance to cool down, and

empty the water reservoir.

Gently pull out the steam control knob –

and the steam valve; make sure not to

touch the valve at its lower end.

Place the valve into a container of normal –

household vinegar, and let it take e ect

for about four hours, until any scale

deposits have been dissolved (do not use

concentrated vinegar).

Any remaining scale residue can be –

removed with a so brush.

Rinse the valve thoroughly in fresh tap –

water and replace it in the appliance.

Set the steam control to ‘dry ironing’, insert –

the plug into the wall socket and turn

the temperature control to its maximum

setting. Any water remaining inside the

steam chamber will now evaporate.

Remove the plug from the wall socket, –

allow the appliance to cool down and

clean the sole plate with a damp cloth.

Storage

Turn o the iron, remove the plug from z

the wall socket and let the unit cool down

completely.

Pour any remaining water out of the –

reservoir through the water  lling hole.

To avoid damage to the soleplate, store

he ir

on in an upright position on its base

stand.

Disposal

Do not dispose of old or defective

appliances in domestic garbage;

this should only be done through

public collection points.

Guarantee

 is product is guaranteed against defects

in materials and workmanship for a period

of three years from the date of purchase.

Under this guarantee the manufacturer

undertakes to repair or replace any parts

found to be defective, providing the product

is returned to one of our authorised service

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA-3252 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin BA-3252 Manual

Product: