556576

Severin BA 3234 Manual

10
Zoom out
Zoom in
Previous page
1/54
Next page
and start with the lowest temperature.
When ironing highly sensitive fabrics, or
if you are not sure about the fabrics, you
may carefully test-iron at a non-visible
point, e.g. inside of seam. Start with the
lowest temperature.
If the laundry is being dried in a dryer
before ironing, the temperature should be
adjusted to “iron dry”. Very dry fabrics are
di cult to iron.
Start up
Clean the steam iron before using for the  rst
time, according to the instructions given in
the paragraph ‘General Care and Cleaning’.
is will result in the removal of possible dust
particles from the soleplate and subsequently
lessen the smell typically encountered when
rst switching on.
Please ensure su cient ventilation.
Ironing
Steam ironing requires high temperatures.
e temperature level for steam ironing
is indicated on the temperature control
knob.
– A er lling the reservoir with water, place
the steam iron upright on its base stand
and insert the plug into the wall socket.
– Set the temperature control knob to the
required ironing temperature as indicated
by the ironing symbols.
– During the heating-up process the
indicator lamp will be on.  e lamp will go
out once the required ironing temperature
is reached.
Before ironing any fabrics, the soleplate
should be cleaned by passing it over an
old, clean cotton cloth, while using the
steam jet
function; this helps to  ush
out any dirt residues or lint particles
trapped inside the openings in the
soleplate.
e steam function can now be switched
on and o using the steam selector.
For dry ironing, the water reservoir may
be empty. Should there be water le in
the reservoir, the steam jet function may
also be used when dry-ironing at higher
temperature settings.
Place the steam iron upright on its base
stand a er use and remove the plug from
the wall socket.
Steam Jet
When the steam jet button (
) is depressed,
an additional hot steam jet is emitted from
the soleplate.  is function can be very
useful when removing stubborn creases.  e
steam jet function may also be used with the
iron held vertically, to restore the surface of
fabrics.
For a su ciently strong steam jet, the
reservoir must be at least a quarter full.
General Care and Cleaning
Before cleaning the appliance, ensure it is
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
– If necessary, the unit may be wiped with a
dry fuzz-free cloth.
– Starch, fat and other deposits on the
soleplate may be removed with a woollen
cloth soaked in a vinegar-water solution.
Do not use abrasives or harsh cleaning
solutions.
Do not put vinegar or other descalers into
the water reservoir.
Storage
Turn o the steam iron, remove the plug
from the wall socket and let the unit cool
down completely.
– Pour any remaining water out of the
reservoir through the water  ll hole.
– Turn the steam selector to the '
'
position.
To avoid damage to the soleplate, store the
steam iron in upright position on its base
stand.
10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin BA 3234 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin BA 3234 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info