322021

Severin ba 3210 Manual

11
Zoom out
Zoom in
Previous page
1/62
Next page
Start up
Clean the iron before using for the  rst
time, according to the instructions given in
the paragraph ‘General Care and Cleaning
- Self-cleaning system’. is will result in
the removal of any dust particles from the
soleplate and subsequently lessen the smell
typically encountered when  rst switching
on.
Please ensure su cient ventilation.
Ironing
Always use the iron on a heat-resistant z
surface.
Steam ironing requires high temperatures. z
e temperature level for steam ironing
is indicated on the temperature control
knob.
A er lling the reservoir with water, place –
the steam iron upright on its base stand
and insert the plug into the wall socket.
Set the temperature control knob to the –
required ironing temperature as indicated
by the ironing symbols.
During the heating-up process, the –
temperature indicator lamp will be on.
e lamp will go out once the required
temperature is reached.  e main
indicator lamp on the handle remains lit
as long as the appliance is connected to
the mains power.
Before ironing any fabric, the soleplate z
should be cleaned by passing it over an
old, clean cotton cloth while using the
steam jet function; this helps to  ush out
any dirt residues or lint particles trapped
inside the openings in the soleplate.
e steam output can be adjusted with z
the steam control button, or switched o
completely for dry ironing.
For dry ironing, the water reservoir may z
be le empty. But if there is any water le
in the reservoir, the steam jet function
may also be used when dry-ironing at
higher temperature settings.
Place the steam iron upright on its base z
stand a er use and remove the plug from
the wall socket.
Automatic switch-o
If the appliance is switched on but has not
been used for a certain period of time, it
will automatically switch o .  is automatic
switch-o is indicated by a beep signal; in
addition, the main indicator lamp in the
handle  ashes. e automatic switch-o is
indicated by a beep signal; in addition, the
red indicator light  ashes. As soon as the iron
is moved, it will switch itself on again.
Horizontal position:
When resting on its sole plate, the iron
will switch o a er approx 30 seconds of
inactivity.
Vertical position:
When standing upright on its base, it will
switch o a er approx. 8 minutes.
Steam jet
When the steam jet button is depressed, an
additional hot steam jet is emitted from the
soleplate.  is function can be very useful
when the normal amount of steam emitted is
not su cient to remove stubborn creases, or
when ironing di cult or thick fabrics.
For optimum steam output, wait about 4
seconds before using this function again.
e steam jet function may also be used with
the iron held vertically, to remove creases or
wrinkles from fabrics.
Note:
For a more powerful steam jet, set the steam
control to ‘dry ironing’.
Using the dual spray nozzle
e laundry can be dampened by pressing
the spray button.  is will help to smooth
out di cult areas, and may be used at any
temperature during dry or steam ironing.
General care and cleaning
Before cleaning the appliance, ensure it is z
disconnected from the power supply and
has cooled down completely.
To avoid the risk of electric shock, do not z
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin ba 3210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin ba 3210 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info