Manual Severin AT 2214 (page 11 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish)

556653

Zoom out

Zoom in

1/64

Operation

General information

∙ Note: the operating lever locks down

only when the plug is inserted.

∙ Do not use slices which are too thick or

too big, as they may become stuck in the

toaster. The thickness of the slices to be

toasted should not exceed 14 mm.

∙ In case of problems or malfunctions

during use, and before cleaning,

always remove the plug from the wall

socket.

∙ To remove a slice caught in the slot, use

a blunt wooden implement (e.g. a brush

handle). Never touch the metal heating

elements.

Before using for the ﬁ rst time

∙ Clean the toaster thoroughly (see

General care and cleaning).

∙ Switch on the toaster without any

bread inserted and go through at least

ﬁ ve toasting cycles at the maximum

temperature setting.

∙ Allow the toaster to cool down between

cycles.

∙ When switched on for the ﬁ rst time, the

toaster may emit a slight smell and a

little smoke. For that reason, adequate

ventilation should be ensured by opening

windows or balcony doors.

Automatic switch-off

This appliance comes with an automatic

switch-off feature. If a bread slice should

become stuck and cannot be ejected after

the toasting cycle is complete, the toaster will

automatically switch off. Should this occur,

disconnect the appliance from the mains and

remove the bread slice as described in the

section General information.

Adjusting the degree of browning

The desired degree of browning can be

varied by turning the adjustable browning

control knob.

Light: turn the control knob anti-clockwise.

Dark: turn the control knob clockwise.

In the case of sliced bread speciﬁ cally

intended for toasting, we recommend a

browning control setting of 3 to 4.

Operation

∙ Insert the plug into the wall socket.

∙ After adjusting the browning control, insert

the bread into the toast slot and press the

operating lever down. The indicator lamp

will go on.

∙ Once the desired degree of browning

is reached, the toaster switches off

automatically; the slices are ejected, and

can be removed once the indicator lamp

goes off.

∙ To achieve regular browning when

toasting several slices in succession,

allow the toaster to cool down for 60 - 90

seconds after each cycle.

∙ Do not cover the toast slot during

operation.

Defrost function

The defrost function may be used in addition

to the normal action when toasting deep-

frozen bread. This will extend the toasting

process. This function is shown by the

indicator lamp.

Warm-up function

The warm-up function is suitable for

re-heating bread which has already been

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Severin AT 2214 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Severin AT 2214 Manual

Product: