602991
10
Zoom out
Zoom in
Previous page
1/60
Next page
10
Before using this appliance for the rst
time
Clean the slicer before using it for the rst
time, or after a long period of non-use.
Applications
The slicer is designed for use with bread,
cooked meats, ham, cheese, cold roasts and
other food suitable for slicing.
Serrated blade
The serrated blade is useful for slicing bread.
Ham-cutting blade
The ham-cutting blade is helpful when slicing
ham, cheese etc.
Changing the blades
Caution: Always disconnect the appliance
from the mains before changing the blades.
To detach the blade, turn the central locking
screw of the blade 90° in a clockwise
direction and take it off. After re- tting the
blade, turn the locking screw 90° anti-
clockwise to lock it.
Operation
Short-term operation
The appliance has been designed for short-
term operation only, i.e. the slicer should not
be operated continuously for more than 10
minutes. Switch it off afterwards and allow
the motor to cool down before switching on
again
Positioning the slicer
Position the slicer on a at, stable
surface.
Before the appliance is connected to the
mains, ensure that the On/Off switch is in
the Off-position.
Slicing
Use the thickness selection knob to adjust
the desired thickness of the slices.
Place the food to be sliced onto the
sliding tray and press it against the stop
plate.
Fit the safety holder, with the studded side
facing the blade, onto the sliding tray.
Switch the appliance on and move the
sliding tray towards the rotating blade. At
the same time, lightly press the end-piece
holder with the food towards the blade.
The end-piece holder ensures safe
handling of the food while slicing.
When removing the sliced food, keep
ngers and hands well away from the
blade, which is extremely sharp.
Always switch the slicer off after use.
For safety reasons, always bring the stop
plate back to its rest position after use so
that it is ush with the blade.
Practical hints
When cutting a loaf of bread where the
crust is thicker or harder on one side, it
should be placed against the blade in
such a way that the rm side faces the
blade.
When cutting ham, ensure that the fatty
side is facing upwards.
Cleaning and care
General
To prevent perishable food particles from
collecting in the slicer, clean it thoroughly
after use.
Always remove the plug from the wall
socket before cleaning the slicer.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin AS 3915 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin AS 3915 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info