647711
11
Zoom out
Zoom in
Previous page
1/68
Next page
11
similar accommodation,
- in bed-and breakfast type environments.
Wall mounting
The wall bracket is designed for storing the
appliance and also serves as a charging
unit.
First insert the charging plug into the wall
bracket, facing up.
Mount the wall bracket vertically, near a wall
socket, using the screws provided with the
appliance.
Both the crevice tool with brush and the
rubber nozzle can be stored on the left and
right sides of the appliance.
Before using for the rst time
Caution: Before the appliance is used for
the rst time, the discharge protection
tab on the On/Off switch must be
removed. Simply pull the tab upwards and
out, and dispose of it.
Charging process
Before using the vacuum cleaner for the
rst time, the battery must be charged for a
period of approximately 10 hours.
Insert the adaptor into a wall socket.
Put the On/Off switch to its off position.
Place the vacuum cleaner in the wall
bracket. The charging process begins
automatically and the indicator light
shows red. Once the red indicator light
goes out, the appliance is ready for use.
This appliance can remain on charge
inde nitely without damage or danger
and is therefore fully charged and ready
for use at all times.
Whilst charging, the adaptor will become
warm. This is perfectly normal and safe
and does not indicate a malfunction of
any kind.
If the vacuum cleaner is not being used
for a long period of time, the capacity of
the battery may decrease by a certain
amount. However, full capacity will be
restored after several charge/discharge
cycles.
12 V operation
With the 12 V connector, the battery
pack may be recharged through the car
cigarette-lighter socket.
Insert the small plug of the connecting
cable into the 12V jack of the vacuum
cleaner, and the larger plug into the car’s
cigarette-lighter socket.
Power is now supplied directly from the
car’s electrical system; the indicator lamp
shows red.
Picking up liquid matter
Before picking up liquid matter, ensure that
the rubber nozzle is fully inserted in the
suction aperture.
Crevice tool
The crevice tool can be inserted into the
suction aperture to clean crevices, corners
and other areas dif cult to reach.
Crevice brush
The crevice brush can be tted to the crevice
tool and is suitable for cleaning uneven
surfaces such as computer keyboards etc.
Operation
Remove the vacuum cleaner from its wall
bracket.
If required, t any of the nozzle
attachments to the suction aperture.
Switch on the appliance using the On/Off
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Severin 7914 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Severin 7914 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info