504983
47
Zoom out
Zoom in
Previous page
1/56
Next page
3. Installation
Please select the menu option “installation “(pin code: 0000 if requested). In this
menu you can work on your antenna setting and make further settings to your
satellite reception.
With the direction keys CH and CH you can navigate them in the menu,
with the key “OK“ you can select a menu option, and you can use the “EXIT
“or “MENU “key to reture to the menu.
L
The transitter data are presetted. Adjust these settings only, if you
know the exact values and know well with satellite transmission
technology.
3.1 Scan
In this menu option you can make simply scan by Satellite Scan, TP Scan, and
Blind Scan
3.2 Antenna setting
In this menu option you can simply set
your Receiver to the satellite as you
wished. The following parameters can be
edited: LNB type; Frequency; DiSEqC;
LNB power.
With the keys VOL and VOL you can
enter your desired values, then to confirm
with “OK“ key thereby the values to be
saved.
Satellite
In the right column you can select a satellite from the pre-programmed ones
(There is only the receiptable satellites, to which your satellite is aligned)
LNB Type
Here you can select the LNB type which can be used by your receiver (standard:
Universal).
The usual standard settings for the respective used LNB type are deposited for
all further menu options.
17
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SetOne TX-1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SetOne TX-1200 in the language / languages: English, German as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info