603252
4
Zoom out
Zoom in
Previous page
1/20
Next page
2) Assembling the Sephra Commercial Chocolate Fountain
a) To assemble the chocolate fountain, first remove the chocolate fountain base unit from
the basin case1. (See Photo 2.3)
b) Place the chocolate fountain base on a table that is capable of supporting at least 150
pounds. The table must be sturdy, stable, and as level as possible.
i) Plug the power cord in and test the unit prior to set up. When the rocker switch (see
photo 5.1) is turned to the “Preheat” or “Start” position a red light, located above the
rocker switch, will illuminate in addition to the fountain either heating or starting.
ii) 9 amps are required to heat and run a 44” Sephra chocolate fountain.
iii) Use caution when testing or running the chocolate fountain so you do not burn
yourself. The bowl will become very hot if the rocker switch is set to “Preheat”.
c) Open the tierset case (See Photo 2.2) and begin to assemble the tierset onto the base in
this order:
(1) Slide the cylinder into the sleeve located in the center of the bowl.
(2) Attach the black plastic stabilizer to the top of the auger just beneath
the knob. (See Photo 2.1) E
(3) Slide the auger with the attached stabilizer into the cylinder.
(a) After the auger has reached the bottom it may be resting on the
square or round spindle. Rotate the auger until you feel it “click”
and drop into place over the spindle. The spindle is the piece that
will cause the auger to spin and push chocolate to the top of the
fountain when the fountain is turned to the “Start” position.
Photos 9.5 and 9.6 will depict the square and round Spindles.
(4) Slide the tiers onto the cylinder starting with the widest tier (Part A)
and ending with the narrowest tier (Part D). (See Photo 2.2 & 2.4) Photo 2.1
(5) Slide the crown onto the cylinder to conclude the assembly process.
Stabilizer
Auger
Cylinder
B
D A Crown
C
Tierset Case
Basin Case
Assembled
Chocolate Fountain
A
B
C
D
Crown
Cylinder
Auger &
Stabilize
r
Photo 2.2
Photo 2.3
Photo 2.4
Bowl
Base
1***IMPORTANT*** Do not discard the black plastic basin or tierset case. They are necessary for
transporting and storing the fountain basin and tierset and are required for shipment.
3
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sephra CF23R2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sephra CF23R2 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sephra CF23R2

Sephra CF23R2 User Manual - German - 24 pages

Sephra CF23R2 User Manual - French - 24 pages

Sephra CF23R2 User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info