603254
11
Zoom out
Zoom in
Previous page
1/22
Next page
12d. STOP button—Stops the motor, causing
the auger to stop spinning. A red LED light
will be lit when the auger is stopped and
the POWER is still on.
Classic and Select models only:
13. HEAT/OFF switch—Turns on the heating
element inside the fountain base. It is set
at a medium heat and should keep the
chocolate warm while it is flowing. A red
LED light will be lit when the switch is
placed in the HEAT position.
14. START/STOP switch—Starts the motor
which causes the auger to spin inside the
cylinder. A red LED light will be lit when
the switch is placed in the START
position.
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONSINSTRUCTIONS
INSTRUCTIONS
FOR USEFOR USE
FOR USEFOR USE
FOR USE
ASSEMBLY
(SEE ILLUSTRATIONS ON PAGES 4-7)
All models:
1. Wash all of the removable components
and the stainless steel basin in hot, soapy
water. Dry thoroughly. DO NOT ALLOW
WATER OR OTHER LIQUIDS TO ENTER
INTO THE BASE OF THE APPLIANCE
THROUGH ANY VENT HOLES
LOCATED ON THE SIDES OF THE
FOUNTAIN OR THROUGH THE
BOTTOM GRATE. DO NOT IMMERSE
THE FOUNTAIN BASE IN WATER.
2. Place the base of your Sephra Home
Chocolate Fountain on a sturdy, level
surface. If the fountain is not level it will
still operate, but the fondue will gap on
one side and will not have the “curtaining”
effect. The fountain has adjustable feet to
assist you in leveling it if your surface is
not level.
Elite, Classic, and Select models only:
3. Align the notch(es) in the top cylinder
(3a) with the key(s) in the bottom cylinder
(3b) and fit securely together. Slide the
cylinder sleeves (3c) onto the basin pegs
(7a).
4. While holding the knob at the top of the
auger (5) insert the auger into the cylinder.
Make sure the auger fits into place over
the spindle centered in between the basin
pegs. Twist the auger clockwise to make
sure it is properly positioned; you should
feel some resistance as you turn the auger.
If melting chocolate in the basin, wait until
the chocolate is completely melted before
inserting the auger. Failure to do so may
damage the fountain or cause it to
malfunction.
5. Slide the bottom tier (6) over the cylinder
until it stops in position. Slide the top tier
(2) over the cylinder in the same manner
until it stops.
6. Slide the crown (1) into the slots at the
top of the cylinder and over the knob of
the auger. The widest part of the crown
should be at the top of the fountain.
Signature model only:
3. Slide the cylinder sleeves (3c) onto the
basin pegs (7a).
4. While holding the knob at the top of the
auger (5), insert the auger into the cylinder.
Make sure the auger fits into place over
the spindle centered in between the basin
pegs. Twist the auger clockwise to make
9
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sephra CF18H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sephra CF18H in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sephra CF18H

Sephra CF18H User Manual - German - 24 pages

Sephra CF18H User Manual - French - 22 pages

Sephra CF18H User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info