753078
24
Zoom out
Zoom in
Previous page
1/40
Next page
Installation instructions, only for experts p. 12/12
8. Error messages
The sauna control unit is equipped with diagnostic software which monitors the
system status upon switching on, and during operation. As soon as the diagnostic
software identies an error, the sauna control unit switches the sauna heater o󰀨.
Errors are indicated on the sauna control unit by a recurring warning tone.
In addition, the text “Err” and the respective error number is displayed on the
sauna control unit. The same error code is also used on the RS485 interface.
In this case, errors are indicated by error and the corresponding error number.
If an error occurs, switch o󰀨 the sauna control unit and rectify the error before
you switch on the sauna control unit again.
The following table describes the errors which may occur, and their causes.
If necessary, tell the error number to your customer service specialist.
Error Description Cause/rectication
01 Safety shut-o󰀨 An object has been placed on the sauna
heater. Remove any objects before start-
ing up the sauna heater again.
02 Excess temperature fuse The maximum temperature of 139 °C
above the heater has been exceeded.
04F1 Heater sensor error Defective heater sensor, poor contact,
or short circuit.
05 Foil sensor error Defective foil sensor, poor contact or
short circuit.
06F2 Bench sensor error Defective bench sensor, poor contact or
short circuit.
07 Humidity sensor error Defective humidity sensor, poor contact
or short circuit
08 Foil sensor
excess temperature
The maximum foil temperature of 100 °C
was exceeded.
FILL Low-water Pour water into the water tank of the
evaporator.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec RS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec RS485 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info