753078
23
Zoom out
Zoom in
Previous page
1/40
Next page
EN
Installation instructions, only for experts p. 11/12
Problem Cause/solution
UNKNOWN COMMAND is re-
turned as a response (ACK)
The command (CMD) is not recognized.
NOT AVAILABLE is returned as
the response (ACK)
A function which the sauna control unit does not
feature was queried or set.
Example: When using a Pro-B2 (Finnish sauna con-
trol unit), the ACK reads not available if the
status of the auxiliary output is queried, because the
Pro-B2 does not feature an auxiliary output.
A preset value other than the
one that was set is returned
as the ACK.
There are maximum and minimum values which
can be set for the various preset values and which
are specied in the command list in the “Value”
column.
If a value is set which is higher than the maximum
value that can be set, the maximum value will be
set automatically.
Example: The preset temperature for the sauna
is set to 110 °C if the command set sauna val
120 is entered.
If a value is set which is lower than the minimum
value that can be set, the minimum value will be
set automatically.
Example: The preset temperature for the sauna is
set to 30 °C if the command set sauna val 10
is entered.
For the fan or light power and
the power of the auxiliary out-
put, the value 0 is returned as
the ACK, although a di󰀨erent
value was set.
Example:
set i-switch val 2
I-SWITCH 0 ;
The dimming mode for the fan, the light or the
auxiliary output is disabled. No power can be set.
The device can only be switched on or o󰀨.
7. Troubleshooting
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec RS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec RS485 in the language / languages: English, German, French as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info