753073

Sentiotec Pro D2 Manual

29
Zoom out
Zoom in
Previous page
1/562
Next page
EN
Installation instructions, for professionals only p. 29/70
WARNING!
Risk of re
The additional output has no overheat cut-out. For this reason, only
intrinsically safe devices should be operated using the additional output.
●If infra-red heaters are connected to the additional output, they must
have an overheat cut-out.
●If infra-red heater panels are connected to an additional output, the
foil sensor 1-014-445/P-ISX-FF must be used and activated on the
technician menu (see “Activating/deactivating foil sensor (only
Pro D2i/Pro D3i)” on page 39).
5.3. Connecting the light
1. Feed the light cable through the cable gland b into the connection area
for 230 V/400 V f.
2. Connect the light cable to the terminal strip d in accordance with the terminal
diagram. Observe the operating instructions for the appliance concerned.
5.4. Connecting the fan (optional)
1. Feed the light cable through the cable gland b into the connection area
for 230 V/400 V f.
2. Connect the fan cable to the terminal strip d in accordance with the terminal
diagram. Observe the operating instructions for the appliance concerned.
5.5. Connecting additional output (optional, only Pro D2i/Pro D3i)
The additional output can, for example, be used for an infra-red lamp or infra-red
heater panels.
1. Feed the connection cable for the additional device through the cable gland 7
into the connection area for 230 V/400 V f.
2. Connect the power supply cables to the terminal strip c in accordance
with the terminal diagram. Observe the operating instructions and safety
instructions for the appliance concerned.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec Pro D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro D2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 15,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info