Manual Sentiotec Pro D2 (page 19 of 562) (English, German, Dutch, French, Italian, Swedish, Finnish)

753073

Zoom out

Zoom in

1/562

Installation instructions, for professionals only p. 19/70

Fig. 2 Position of the attachment device and the installation holes

(dimensions in mm)

To install the sauna control unit, perform the following steps:

1. Screw two cross-head screws (16 mm) into the wall of the sauna at a height

of approx. 1.70 m and leaving a protruding length of 7 mm. The two screws

must be placed at a distance of 145 mm from each other (see Fig. 2).

2. Press the clip locks C in lightly using a screwdriver and remove the cover

from the housing (see Fig. 3).

3. Fasten the sauna control unit onto the cross-head screws using the attach-

ment device A as an aid (see Fig. 2).

4. Screw two cross-head screws (16 mm) into the lower fastening holes B

(see Fig. 2).

175

145

Fig. 3 Removing the cover from the housing

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro D2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 15,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sentiotec Pro D2 Manual

Product: