753077
2
Zoom out
Zoom in
Previous page
1/28
Next page
EN
Instructions for installation and use p. 2/3
1. Installing the power supply unit Pro D IP65
Perform the following steps to assembly the power unit:
1. Open the casing by loosening the screw connection of the lid.
2. Remove the lid of the Wave.com4 power unit.
3. You can a󰀩x the power unit to the underground at the 4 corners of the chassis.
ATTATION!
The cable glands must not point upwards!
After completing the connection work tighten the screw caps on the cable
glands to achieve a tight seal.
2. Electrical connection
a
b Cable gland for evaporator cable
c Cable gland for cable of additional output
d Cable gland for remote start, safety switch o󰀨
and RJ data cable
e Cable gland for F1, F2-, FTS2- and foil sensors
and status output
f Function selection switches
g RJ10 socket for the control panel
h Terminal strip for safety switch o󰀨, remote start,
status output and sensor wires
i Low-voltage connection area
1 Terminal strip external main switch
2 Terminal strip external light switch
3 Connection area for 230 V/400 V
4 Terminal strip for lights and fan
5 Terminal strip for power booster
6 Terminal strip for heater and power supply
cables, evaporator wires and additional
device
7 Earth rail
8 Cable gland for wires of main switch, light,
fan and power booster
9 Cable gland for power supply cable
a Cable gland for heater cable
9 b c d
1
2
3
4
5
6
7
8
i
h
g
f
e
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec Pro D - IP65 SUPPLEMENT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro D - IP65 SUPPLEMENT in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info