753072

Sentiotec Pro C3 Manual

28
Zoom out
Zoom in
Previous page
1/380
Next page
Installation instructions, only for experts p. 28/54
Activating/deactivating phase alignment
Phase alignment is activated or deactivated using the function selection switch 3.
●The function selection switch 3 is set to the ON position as standard. Phase
alignment is therefore activated.
●If you wish to deactivate phase alignment, place the function selection switch
3 in the OFF position.
Setting the light operating mode
The light for the sauna room can either be dimmed or switched on and off.
The dimmer switch function is activated or deactivated using the function selec-
tion switch 5.
●The function selection switch 5 is set to the ON position as standard. The dim-
mer switch function is therefore activated.
►To change the dimming characteristic, see “Changing the light dimming
characteristic” on page 32.
●If you wish to deactivate the dimmer function for the sauna room light, place
the function selection switch 5 in the OFF position.
Status output
The function selection switch 7 can be used to help to decide whether the sta-
tus output should be activated during sauna mode or during the post-drying
programme. Activation during the post-drying programme allows the evaporator
tobedrainedautomaticallywhenacombiheaterwithanautorellfunctionis
being used.
●The function selection switch 7 is set to the OFF position as standard. The sta-
tus output is therefore activated during sauna mode.
●If you wish to activate the status output for the post-drying mode, place the
function selection switch 7 in the ON position.
Setting the operating mode for the additional output
Theadditionaloutputcaneitherberegulatedorswitchedonando󰀨.Thedimmer
switch function is activated or deactivated using the function selection switch 8.
●The function selection switch 8 is set to the ON position as standard. The dim-
mer switch function is therefore activated.
●If you wish to deactivate the dimmer switch for the additional output, place
the function selection switch 8 in the OFF position.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec Pro C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro C3 in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info