753071

Sentiotec Pro C2 Manual

19
Zoom out
Zoom in
Previous page
1/340
Next page
EN
Installation instructions, only for experts p. 19/48
2. Connect the red wires for the heater sensor to the terminals labelled “STB”
in terminal strip 2.
3. Connect the white wires for the heater sensor to the terminals labelled “F1”
in terminal strip 2.
5.7. Installing bench sensor F2 (optional)
1. Guide the wires for the bench sensor through the cable bushing 4 into the
low-voltage connection area 1.
2. Connect the wires for the bench sensor to the terminals labelled “F2” in
terminal strip 2.
5.8. Connecting the lm sensor (optional)
1. Guide the wires for the sensor through the cable bushing 4 into the low-
voltage connection area 1.
2. Connect the wires for the sensor to the terminals labelled “FF” in terminal
strip 2.
5.9. Connecting the safety shut-o󰀨 device
EN 60335-2-53 states that sauna control units with remote control may only be
usedforoperatingandregulatingasaunaheaterwhichhassatisedthecombus-
tiontestdescribedinparagraph19.101.Alternatively,asuitablesafetyshut-o󰀨
devicecanbeinstalledinorabovetheheater.Thisshutsthesaunaheatero󰀨
when objects, e.g. a towel, are placed on the sauna heater.
Toinstallthesafetyshut-o󰀨device,performthefollowingsteps:
1. Installthesafetyshut-o󰀨deviceinaccordancewiththeoperatinginstruc-
tions for the device.
2. Guidethewiresforthesafetyshut-o󰀨devicethroughthecablebushing6
into the low-voltage connection area 1.
3. Connect the wires for the temperature sensor to the terminals labelled “OSG”
in terminal strip 2.
Ifasafetyshut-o󰀨isnotinstalled,tajumperattheterminals
labelled “OSG”.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec Pro C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec Pro C2 in the language / languages: English, German, Dutch, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 5,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info