Manual Sentiotec IS2 (page 7 of 100) (English, German, Dutch, French, Italian, Swedish)

753105

Zoom out

Zoom in

1/100

5 Befestigung der Steuerung

Vorsicht - Schäden am Gerät: Verwenden Sie keinen Akkuschrauber um die Steuerung zu befestigen.

5.1 Abnehmen des vorderen Deckels

Um die Steuerung an der Wand zu befestigen muss der

vorder Decke der Steuerung abgenommen werden. Verwenden

dazu einen ﬂ achen Schraubendreher mit einer Breite

von ca. 3mm.

• Führen Sie den Schraubendreher in die vorgesehene

Öffnung an der Unterkante der Steuerung

• Der Deckel wird von einem Schnapphaken gehalten.

Drücken Sie diesen vorsichtig nach innen bis sich der Deckel

löst.

• Nehmen Sie nun den Deckel von der Steuerung ab.

Nachdem das Bedienteil an der Wand befestigt ist,

muss der Deckel wieder aufgesetzt werden.

• Hängen Sie den Deckel zuerst an seiner Oberkante in das Steuerungsgehäuse ein.

• Drücken Sie nun die Unterseite gegen das Gehäuse bis der Deckel wieder einrastet

Abb 6 Deckel abnehmen

5.1 Aufputzmontage

Zum befestigen der Steuerung verwenden Sie die langen,

im Lieferumfang enthaltenen, Schrauben.. Verwenden Sie keinesfalls

größere Durchmesser. Dies kann das Gehäuse

irreparabel schädigen.

Achten Sie beim Eindrehen der Schrauben darauf

keine, in der Wand verlegten, Kabel zu beschädigen

Dies kann zu schweren Personen- und Sachschäden

führen

Abb. 7 Befestigung Aufputz

Montageanweisung nur für Fachpersonal S. 7/14

WE DO IT FIRST.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec IS2 in the language / languages: English, German, Dutch, French, Italian, Swedish as an attachment in your email.

The manual is 4,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sentiotec IS2 Manual

Product: