753057
84
Zoom out
Zoom in
Previous page
1/92
Next page
Instructions for use for the user p. 40/44
1. Replace the fuse for interior lighting B (microfuse 5 x 20 T2.0 A/ 250 V) or
fuse for the electronics of the device A (microfuse 5 x2 0 T630 mA/ 250 V)
A or fuse for fan 8 (sub-miniature fuse TR5 - T1,0A/250V) (Fig. 1).
2. Insert tabs 3 of the operating unit 2 into the two lateral holders 4 and
carefully press onto the housing lower part 7 to the stop position.
3. Place the housing cover 6 onto the housing lower part 7, swivel downward
and press until it clicks audibly. Check the t of the control unit.
9.4. Error messages
An error message indicates an electrical malfunction in the system. The sauna
control unit is no longer operational.
Error Description Cause / rectication
ERR 1 Excess temperature F1
defective
See point “6. Performing tests” on
page 18
ERR 3 Break in sensor line F1 See point “6. Performing tests” on
page 18
ERR 4 Short-circuit F1
Check the sensor lines and the terminals
ERR 5 Short circuit FTS2 / F2
(temperature sensor)
Check the sensor lines and the terminals
ERR 6 Line interruption FTS2 /
F2 (temperature sensor)
Check the sensor lines and the terminals
ERR 7 Line interruption FTS2
(humidity sensor) or F2
is not recognized
Check the sensor lines and the terminals;
restart the control unit, press PROG/OK
button for 30 seconds
ERR 8 Short circuit FTS2
(humidity sensor)
Check the sensor lines and the terminals
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sentiotec CK 41 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sentiotec CK 41 in the language / languages: English, German as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info