471976
11
Zoom out
Zoom in
Previous page
1/21
Next page
ENFRITNLPTRUZH ES DE
Putting the XS WIRELESS systems into operation
XS WIRELESS | 7
Putting the XS WIRELESS systems into operation
Putting the receiver into operation
You can set up the receiver as a single device or mount it into a 19” rack. For information
on rack mounting and optional accessories (e.g. rack mount “ears” and remote antennas),
visit the XS WIRELESS product page at www.sennheiser.com.
Setting up the receiver
̈ Place the receiver on a flat, even surface.
Connecting the receiver to the mains
̈ Connect the connector of the mains unit to the DC socket C on the receiver.
̈ Connect the mains unit to a wall socket. The receiver switches on, the display panel is
backlit.
Connecting and aligning the rod antennas
The supplied rod antennas are suitable for all applications where – good reception condi-
tions provided a wireless transmission system is to be used without a large amount of
installation work. To increase the range, you can use remote antennas which are available
as accessories from your specialist dealer.
̈ Connect the two rod antennas to the BNC sockets
E and 8 at the rear of the receiver.
̈ Align the antennas in a V-shape.
Connecting the amplifier/mixing console
̈ Use a suitable cable to connect the amplifier or mixing console to the XLR-3M socket
9
or the ¼” (6.3 mm) jack socket 0.
̈ For a rough adjustment of the AF audio level, set the LINE/MIC slide switch
A to the cor-
responding position.
̈ Use the volume control 7 of the receiver to optimally adjust the AF audio level to the
input of the amplifier or mixing console.
CAUTION
Risk of staining furniture surfaces!
Furniture surfaces are often treated with varnish, polish or synthetics which might cause
stains when they come into contact with other synthetics such as the device feet.
̈ Do not place the receiver on delicate surfaces; if necessary, place a pad under the
receiver.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser XSW 35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser XSW 35 in the language / languages: English as an attachment in your email.

The manual is 14,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info