471977
15
Zoom out
Zoom in
Previous page
1/21
Next page
ENFRITNLPTRUZH ES DE
Using the XS WIRELESS systems
XS WIRELESS | 11
The menu items and their adjustment possibilities
TUNE menu item
̈ Use the UP button
3 or DOWN button 4 to select an unused frequency.
̈ Press the set button
6 to store your setting.
PRESET menu item
̈ Use the UP button
3 or DOWN button 4 to select a frequency bank.
̈ Press the set button
6 to store your setting.
̈ Use the UP button
3 or DOWN button 4 to select a channel.
̈ Press the set button
6 to store your setting.
SCAN menu item
Pressing the set button
6 to activate the SCAN menu item automatically selects an
unused channel.
To select another frequency bank:
̈ Press the UP button
3 or DOWN button 4.
̈ Press the set button
6 to store your setting.
Synchronizing a transmitter with the receiver
The receiver always transfers the frequencies to the transmitter.
̈ Switch the transmitter and the receiver on.
̈ Keep the button 7 of your transmitter pressed until the SYNC display M flashes
on the receiver’s display panel.
̈ Press the button
5 of the receiver to transfer the selected frequency to the
transmitter.
Adjusting the squelch threshold
Interference of the RF signal due to other transmission links can be eliminated as follows:
̈ Switch the transmitter off. The receiver should no longer receive a signal.
̈ If the receiver still receives a signal, use the rotary switch for squelch threshold “SQ
B
to increase the squelch threshold so that the signal will no longer be received. If the
signal cannot be eliminated in this way, set the transmitter and the receiver to a dif-
ferent channel.
̈ Switch the transmitter on again and check if the receiver receives the transmitter
signal.
You can also synchronize a switched-off transmitter with the receiver. The trans-
mitter automatically switches on during the synchronization process.
If the squelch threshold is adjusted too high, the transmission range will be reduced.
Therefore, always adjust the squelch threshold to the lowest possible setting.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser XSW 12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser XSW 12 in the language / languages: English as an attachment in your email.

The manual is 14,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info