471979

Sennheiser SZI 1029 Manual

17
Zoom out
Zoom in
Previous page
1/59
Next page
32
33
MONO MULTI
CHANNEL
OUTPUTINPUT
IR input BNC
MONO MULTI
CHANNEL
PUTTING THE RADIATOR Insert the mains connector and secure it with the steel clamp.
INTO OPERATION
MAINS CONNECTION
Install the SZI 1029 high power radiator in a vertical (or almost vertical)
position. The cables are guided downwards.
The vertical position ensures sufficient cooling of the radiator - air can
circulate through the cooling fins that are integrated into the sides of the
radiator.
The SZI 1029 high power radiator is provided with an interchangeable
thread for mounting it to stands with 3/8" or 1/2 „threads using an adaptor
(included in the scope of delivery).
CONNECTING AN IR RADIATOR After having connected the radiator to the mains, the IR input of the
SZI 1029 has to be connected to the IR output of the modulator.
Several co-axial cables are available for this purpose (see ELECTRICAL
ACCESSORIES). The cables can be connected to one another using a
BNC coupler GZV 1019 A.
IR output BNC for extension radiators
For permanently installed systems you should use commercially available
50 Ω coaxial cables, such as RG 58 (75 Ω cables can be used if 50 Ω
cables are unavailable). If you want to use several SZI 1029 radiators
you have to connect them in series. This is done by connecting the output
BNC socket of the first radiator with the IR input BNC socket of the
second radiator. A maximum of 100 radiators can be connected in series.
The maximum total length of the cable should not exceed 1500 m.
After having connected the last radiator you can put the transmission
system into operation by switching on the modulator. It transmits a carrier
signal which automatically switches on the radiators. When the carrier
signal stops, the radiators switch off automatically.
N.B.: In order to avoid standing waves a terminating impedance of 50 Ω
should be connected to the last radiator (or 75 Ω terminating impedance
if 75 Ω cable was used).
SINGLE-CHANNEL/MULTI-
CHANNEL OPERATION
Selector switch single-
channel (Mono)/multi-
channel (Multi)
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SZI 1029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SZI 1029 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info