471985
30
Zoom out
Zoom in
Previous page
1/46
Next page
Adjusting settings via the operating menu
28
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the transmitter is accidentally switched off or programed during
operation. The lock mode icon on the standard display indicates that the lock mode is
activated. For information on how to use the lock mode, refer to page 15.
The extended menu “Advanced Menu
Setting the transmission frequencies and the frequency banks “U1” to “U6” –
“Tune”
Via the “Tune” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the selected frequency
bank (“U1” to “U6”)
or
2. select a frequency bank (“U1” to “U6”) and a channel and assign this channel a
transmission frequency.
Setting a transmission frequency for the current channel
Sensitivity
Mode
Easy Setup
Frequency Preset
Name
Equalizer
Auto Lock
Advanced
Exit
Menu
̈ Turn the jog dial to select the desired setting.
Auto Lock
– 18 dB
Select the desired
setting
Auto Lock
Store the setting
Menu
Inactive
Inactive
Call up “Auto Lock”
Equalizer
Auto Lock
Advanced
“Stored”
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
PEAKPEAK
-10
0
-20
-30
-40
-10
0
-20
-30
-40
AF
AF
Active
Advanced Menu
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
When you have selected one of the system banks and then select theTune” menu,
the transmitter automatically switches to channel 1 of the frequency bank “U1”. In
this case, “U1.1” briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “U1” to “U6” are not assigned a
transmission frequency.
When you are in the “Tune” menu item, the RF signal is deactivated.
Advanced Menu
Tune
Sync Settings
RF Power
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
̈ Turn the jog dial until the “Tune” menu item appears.
̈ Press the jog dial.
The frequency selection appears.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 300 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info