471985
14
Zoom out
Zoom in
Previous page
1/46
Next page
Putting the transmitter into operation
12
Connecting a remote antenna to the BNC socket
Use a remote antenna when the transmitter position is not the best antenna position for
optimum transmission. You can choose between two antennas:
A 2003 UHF passive directional antenna
A 1031 passive omni-directional antenna
̈ Use a low-attenuation 50- cable to connect the antenna to the transmitter.
̈ If possible, use a short antenna cable and as little connections as possible, since long
cables and many connectors lead to an attenuation of the antenna signal.
̈ Position the antenna in the same room in which the transmission takes place.
̈ Observe a minimum distance of 1 m between the antenna and metal objects (including
reinforced concrete walls).
Connecting the AC 3 antenna combiner to the BNC socket
To make multi-channel systems, you should use the AC 3 antenna combiner (see “Accessories
and spare parts” on page 36). The AC 3 allows you to operate up to four transmitters with a
single antenna without virtually any intermodulation.
In addition, the AC 3 incorporates DC distribution to enable simultaneous powering of up to
four transmitters via its BNC sockets.
̈ Connect the AC 3 antenna combiner to the BNC socket Ƽ.
Connecting transmitters in a network
You can connect several transmitters in a network. The transmitters are remote controlled via
a PC running the “Wireless Systems Manager” (WSM) software. This software will assist in
the quick and safe configuration of multi-channel systems.
̈ Connect a standard network cable (at least Cat 5) to the LAN socket ¸ of the transmitter.
̈ Connect your transmitter to an Ethernet switch.
̈ Connect the other transmitters to the Ethernet switch.
̈ Connect a PC to the Ethernet switch.
When a transmitter is properly connected to the Ethernet switch or the PC, the yellow
LED µ at the rear of the transmitter lights up.
The “Wireless Systems Manager” (WSM) software can be downloaded from on our
website at www.sennheiser.com.
L(I)
+22dBu
MAX
Loop O
u
BAL
0682
FREQ Range-D 780-822 MHz
DESIGNED AND MADE IN GERMANY
Stereo Transmitter SR 3
0
IDENT NO 627925
SER NO 2518100155
IC 2099A-G3SREK
¸µ
For further information on network operation using the WSM, refer to page 33.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 300 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info