471985
12
Zoom out
Zoom in
Previous page
1/46
Next page
Putting the transmitter into operation
10
̈ Connect the antenna. You have the following options:
You can connect the supplied rod antenna ƽ to the rear of the transmitter (see
page 8). In this case, insert the two blanking plugs into the holes of the blanking
plate (see diagram on page 9).
You can use the AM 2 antenna front mount kit (see “Accessories and spare parts” on
page 36) and mount the rod antenna to the blanking plate .
You can use a remote antenna, if necessary in conjunction with the AC 3 antenna
combiner.
̈ Slide the transmitter with the mounted blanking plate into the 19" rack.
̈ Secure the rack mount “ear” and the blanking plate to the 19" rack.
Rack mounting two transmitters
To mount two transmitters into a rack using the GA 3 rack adapter:
̈ Place the two transmitters side by side upside-down onto a flat surface.
̈ Secure the jointing plate to the transmitters using six recessed head screws (M 3x6).
̈ Secure the rack mount “ears” to the transmitters as described on page 8.
To mount the transmitters into the rack:
̈ Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.
For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
̈ Slide the transmitters into the 19" rack.
̈ Secure the rack mount “ears” to the 19" rack.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 300 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info