471993
32
Zoom out
Zoom in
Previous page
1/44
Next page
Synchronizing the transmitter with the EK 2000 IEM receiver
30
Synchronizing the transmitter with the EK 2000 IEM
receiver
When synchronizing your transmitter with the EK 2000 IEM receiver, please observe the
following:
Synchronizing the transmitter with an EK 2000 IEM receiver
individual operation
Upon delivery, transmitter and receiver are synchronized with each other. If, however, you
cannot establish a transmission link between transmitter and receiver, you have to
synchronize the channels of the devices:
̈ First carry out the Easy Setup Sync function (see table on page 16, left-hand column).
The transmitter is set to a suitable frequency.
̈ Then carry out the Sync function (see table on page 16, right-hand column).
This establishes a transmission link between the transmitter and the receiver.
Alternatively, you can set the channel on the transmitter manually:
̈ Make sure that you set the transmitter to the same frequency bank and the same channel
as the receiver.
Synchronizing transmitters with EK 2000 IEM receivers – multi-
channel operation
Network operation In multi-channel operation, the transmitters are remote controlled via a PC running the
Wireless Systems Manager” (WSM) software.
̈ Connect your transmitters and your PC in a network (see page 12).
̈ Switch your transmitters and your PC on.
̈ Launch the “Wireless Systems Manager” (WSM) software.
̈ To set up your multi-channel system, proceed as described in the instruction manual of
the “Wireless Systems Manager” (WSM) software.
̈ Only use a transmitter and a receiver from the same frequency range (see the
type plates on the transmitter and the receiver).
̈ Make sure that the desired frequencies are listed in the enclosed frequency
information sheet. You can also contact your Sennheiser partner who will be
pleased to calculate intermodulation-free frequencies for you.
̈ Make sure that the desired frequencies are approved and legal in your country
and, if necessary, apply for an operating license.
̈ The frequency information sheet can also be downloaded from the corresponding
product page on our website at www.sennheiser.com.
Advantages of controlling the transmitters via the “Wireless Systems Manager
(WSM) software:
Detailed overview of all transmission and receiving channels
Remote control of all transmitters in the network
Combination of transmitters of different frequency ranges (see page 4).
Stereo Transmitter SR 2050 IEM
Stereo Transmitter SR 2050 IEM
Stereo Transmitter SR 2050 IEM
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2050 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info