471992
37
Zoom out
Zoom in
Previous page
1/44
Next page
If a problem occurs ...
35
If a problem occurs ...
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,
please contact your local Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at www.sennheiser.com under “Service & Support”.
Problem Possible cause Possible solution
Transmitter cannot be
operated, “Locked” appears on
the display panel
Lock mode is activated Deactivate the lock mode (see page 14).
No operation indication No mains connection Check the connections of the mains cable.
No RF signal at the receiver Transmitter and receiver are not
on the same channel
Synchronize the transmitter with the receiver
(see
page 15
).
If “RF Mute” additionally appears
on the transmitter display:
RF signal is deactivated
Activate the RF signal (see page 14).
Very weak RF signal at the
receiver
Transmission range is exceeded Reduce the distance between receiver and
transmitter.
Reposition the antennas.
Increase the transmission power (see page 19).
Reduce the squelch threshold (see the
instruction manual of the receiver).
RF signal available,
no audio signal at the receiver
No input signal at the transmitter Check the audio level on the transmitter display
(see page 7)
Very low input signal Check the audio level on the transmitter display
(see page 7), increase the level of the input
signal or adjust the input sensitivity (see
page 19).
Audio signal has a high level of
background noise
Transmitter sensitivity is adjusted
too low
Adjust the transmitter sensitivity correctly
(see page 19).
Audio signal is distorted If “AF PEAK” additionally appears
on the transmitter display:
transmitter sensitivity is adjusted
too high
Adjust the transmitter sensitivity correctly
(see page 19).
Receiver’s audio output level is
adjusted too high
Reduce the audio output level of the receiver.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sennheiser SR 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sennheiser SR 2000 in the language / languages: English as an attachment in your email.

The manual is 8,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info